Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
MARTIN REMORQUES / SALES • PARTS • SERVICE

Equipment installation on your trailer

A trailer does far more when it’s equipped for your work or your fun. Our Saint-Ambroise-de-Kildare mechanics install equipment on your trailer: you tell us what you want to do, and we find the parts.

The workshop’s repair and maintenance door, at 270, route 343
WHAT’S INCLUDED

What we can fit to your trailer

Bring us your project. We suggest the parts, order them and fit them. Here are some examples.

Cutaway drawing of an enclosed trailer with the equipment the shop can fit: shelving, a winch, E-track rails and D-rings, glide strips, a work light, a ramp, a toolbox, a jack and a coupler
Fitted-out enclosed trailer, cutaway
  1. A winch and what it needs for power

  2. A storage box

  3. Tie-down rails and rings

  4. LED, reverse or work lights

  5. Ramps and loading accessories

  6. Snowmobile glide strips

  7. Shelving and an enclosed trailer fit-out

  8. A new jack or trailer coupler

GOOD TIME TO TALK

When it’s worth equipping

If this sounds like you, let’s talk.

Sound familiar?

Call the shop or ask for an appointment. We’ll go over what needs to be fitted.

  • In use

    You just bought your trailer and want to adapt it

  • By touch

    You struggle to load your equipment

  • On the road

    Your load moves around in the trailer

  • In use

    You spend your time looking for your tools

  • By eye

    You back up blind at night on the job site

  • By touch

    Your snowmobile or ATV catches on the deck

HOW IT WORKS

Your project, in four steps

  1. You tell us your idea

    The trailer, what you haul and what’s missing.

  2. We find the parts

    Our parts department looks for what suits your trailer.

  3. We plan the visit

    Once the parts arrive, we plan the shop time with you.

  4. We fit it, you try it

    The wiring is protected and securely fastened, and everything is tested before you leave.

Equipping a trailer is also about weight

Every piece of equipment adds weight, and that weight comes off what the trailer can carry. A winch and box at the front also change the tongue weight. Tell us what you usually haul: we take it into account when choosing what to fit, and where.

An example: the snowmobile trailer

On a snowmobile trailer, glide strips protect the deck and make loading easier, and a ramp extension helps a low sled. Our article on getting ready before the season goes into detail.

Another example: the work trailer

An enclosed job site trailer becomes a real workshop on wheels with shelving, rails and good lighting. A new Ideal Cargo trailer can also be ordered in the configuration you want. If you’re still choosing, look at our enclosed trailers.

Before fitting a winch

A winch is chosen for what it has to pull, not just for its price. Look at the weight of what you load, and think about the ramp angle and wheels that don’t always roll. You also have to plan its power: an on-board battery or wiring back to the vehicle, with wires heavy enough for the current it draws. And it needs a solid base, because a winch bolted to thin metal eventually bends it.

A storage box is simpler, but the same logic applies: it has to be well fastened, well placed for weight, and easy to open once the trailer is loaded. Before ordering, tell us where you were thinking of putting it, and we’ll see if it works with your trailer.

The Martin Remorques store and workshop, at 270, route 343
The store and workshop, at 270, route 343.

Tying down what you haul

The equipment that makes the biggest difference on a trailer is often the simplest: tie-down points placed where you need them. A load has to be secured so it can’t move forward, backward or sideways. For an ATV, a machine or a snowmobile, look at where the straps will run before drilling anything, and think about what you haul most often.

On an enclosed trailer, rails on the walls and floor let you move the anchors to suit the day’s load. On a flatbed, recessed rings keep the deck clear when they’re not in use. Always use straps rated for what you’re hauling, and check them after a few kilometres, because a load settles as it rolls. Well-installed equipment should also stay easy to service: keep access to the lights, wiring and grease points when you choose a location. If you’re not sure what you need yet, start with the job itself: what you load, how often, and who does the loading. It’s much simpler to plan a fit-out around the way you really work than to move everything later on.

And if you’re still unsure, come by with the trailer: it’s often simpler to look at it together, on site, than to explain everything over the phone.

WORKSHOP APPOINTMENT

Book a workshop appointment

Tell us which trailer and what work: we call you back to set the date and plan the parts.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

Work needed

We call you back to confirm the date.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask a question
Can you install an accessory on my trailer?

Yes, our mechanics install equipment on your trailer. We can also order the accessory for you.

Can I bring a part bought elsewhere?

Call us first at 450 759-0472 with the make and model of the part and the trailer.

Can a new trailer be equipped before pickup?

Mention it to your advisor when choosing the trailer: we look at the maker’s options and what we can fit in the shop.

How much does an installation cost?

It depends on the equipment and the trailer. Tell us your project: we confirm the parts and the price.

Which winch do I need for my trailer?

It depends on what you load and the ramp angle. Tell us the load weight and your trailer: we look at the winches that suit.

Where should tie-down points go?

Where straps can pull forward, backward and sideways, based on what you haul most often. Show us your load: we’ll look at it together.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm