4 in. flatbed straps and winches
On a deckover, wide loads and pallets are held with 4 in. straps, tightened by winches mounted on the side of the trailer. With corner protectors, they hold lumber, block, pallets and materials without damaging them.

Choose your part
The 4 in. strap
A flatbed strap is 4 in. wide and often 27 or 30 ft long, enough to go over a wide load and back to the winch on the other side. Its flat hook sits on the rub rail or the deck edge; some have a chain or ring end. A good 4 in. strap often has a working load limit of about 5,400 lb.
Faucher makes straps and transport hardware for trucks and flatbeds, and Erickson straps in several widths for tie-down.
Faucher7840009 winch strap, 3 in. x 30 ft, grade 70 chain and hookFlatbed winches
A flatbed winch bolts on, or slides along a rail under the trailer’s edge, or welds to the frame. The strap winds onto its drum, and a winch bar slipped into the drum tightens it firmly. A sliding winch moves along the rail to line up with the load.
Many Laroche and N&N deckovers already have a rail for sliding winches: you only need to add the winches and straps. Our shop also installs rails and fixed winches on other trailers.
Faucher7846515 winch strap, 4 in. x 30 ft, 3/8 in. grade 70 chainProtecting the load and the strap
Corner protectors, in plastic or metal, go on the edges of the load: they keep the strap from cutting into lumber or cardboard, and the edge from cutting the strap. A wear sleeve protects the web where it rubs on the rail.
Faucher7845448 sliding deck winch for 2 to 4 in. strapsIn practice
A building supply dealer delivers pallets of block on a 102 in. deckover with six sliding winches and six 4 in. straps, and corner protectors on every pallet. A contractor keeps a winch bar clipped to the trailer’s toolbox to tighten and loosen in seconds.
Faucher7847438 narrow weld-on winch for 2 to 4 in. strapsGood to know
On a tall or unstable load, such as stacked pallets, a strap every four or five feet of length keeps it in place, and a strap across the front stops it sliding forward when braking. The strap is tightened enough to hold the load, but not so much that it crushes the pallets or the lumber underneath.
Faucher7845416 chrome winch bar, 32 1/2 in.What we can order
- 27 and 30 ft 4 in. straps
- Flat, chain and ring end fittings
- Sliding winches and rails
- Bolt-on and weld-on winches
- Winch bars
- Corner protectors and wear sleeves
Care
Grease the winches and check their pawl every season, and replace a cut, frayed or faded strap. Roll the straps tight after use so they do not drag.
Keep the corner protectors with the straps: they are often forgotten at loading time.
Erickson78632 ratchet strap, 2 in. x 22 ft, 10,000 lb, wear sleeveOrdering at Martin Remorques
Tell us your deckover and what you haul: we supply the winches, rails, straps and protectors, and install them.
Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.
Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.
You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Request a part
Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
Which strap length for a 102 in. deckover?
Most often 27 or 30 ft, depending on the height of the load.
Can winches be added to my trailer?
Yes, on an existing rail or on one our shop installs.
Are corner protectors needed?
They protect both load and strap on sharp edges; they are strongly recommended.
Can a 4 in. strap be used without a winch?
Yes, with a 4 in. ratchet strap hooked to the stake pockets or the rub rail; the winch simply makes tightening and storing the strap faster on a trailer used every day.
Do flatbed winches lock?
Their pawl holds the strap tight; the winch bar is used to tighten and to release, and it is safer to keep it with the trailer than to look for a substitute bar on the road.
How do I order a part from Martin Remorques?
Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.
Can Martin Remorques install the part?
Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.
Your next project
Let’s talk
A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.












