Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
WEBERLANE · HOME AND CONTRACTOR · ON ORDER

Weberlane tilt-N-Load trailers

Weberlane Tilt-N-Load trailers are low-profile tilt deck trailers, from 3.5 to 10 tons. Vehicles, recreational equipment, compact loaders and mini excavators drive up a gentle slope, with no separate ramps.

Weberlane Tilt-N-Load tilt deck trailer
Weberlane · Home and contractor
IN STOCK

Not in the yard right now
Here’s what we have that’s close

SPECIAL ORDER

The 4 models to order

Not in the yard? Martin Remorques orders this trailer from Weberlane in the configuration chosen with you.

Special order · Weberlane

Gravity Tilt

Tilts with no hydraulics, 48" mesh tailgate ramp, for one well-balanced machine

Special order · Weberlane

Power Tilt

12 volt power pack in a polyethylene tongue box, full control of the deck

Special order · Weberlane

Deckover Power Tilt

Full-width deck, front bed locks, side loading

Special order · Weberlane

Deckover Gravity Tilt

Full-width gravity tilt deck, tri-axle option

Gravity, Power or Deckover

The Gravity Tilt tilts on its own: the deck lowers gently as the machine drives on or off, with no buttons, hydraulics or battery. It suits one well-balanced machine. The Power Tilt raises and lowers the deck with a 12 volt power pack: you decide when it moves, which is ideal for several machines or a machine with a heavy front or rear attachment.

When the machine is too wide to fit between the fenders, the Deckover versions have a full-width deck above the wheels, in Power or Gravity. For heavier loads, Weberlane offers 27 and 29 ft tri-axle Deckovers.

In practice

An excavating contractor moves his mini excavator from site to site on a Gravity Tilt: he drives onto the deck, which tilts under the weight then returns flat, and ties the machine to the rings. A landscaper who hauls a compact loader with a heavy bucket and a mower chooses a Power Tilt, to lower and raise the deck exactly when he wants.

Choosing a Tilt-N-Load

Start with the machine. A well-balanced compact loader, mini excavator or tractor climbs a Gravity Tilt with no problem: the deck tilts under its weight, then returns flat, with no battery or hydraulics. If you haul two machines, a machine with a heavy bucket or hammer up front, or if you want to decide yourself when the deck moves, choose a Power Tilt.

Then measure the width. If the machine or its tracks go beyond the space between the fenders, the Deckover, with its full-width deck, is the answer. For heavier loads, the 8,000 lb axle options with 17.5" tires, or three axles on 27 and 29 ft, add capacity.

Integrated metal ramps and heavy-duty tie-down rings come on every model.

The models

  • Gravity TiltTilts with no hydraulics, 48" mesh tailgate ramp, for one well-balanced machine
  • Power Tilt12 volt power pack in a polyethylene tongue box, full control of the deck
  • Deckover Power TiltFull-width deck, front bed locks, side loading
  • Deckover Gravity TiltFull-width gravity tilt deck, tri-axle option

Standard equipment

  • Integrated metal checkerplate ramps
  • Integrated heavy-duty tie-down rings
  • Wood deck
  • Spring axles with brakes and EZ Lube hubs
  • White modular wheels with C6 radial tires
  • 14,000 lb coupler for a 2 5/16" ball (Power and Deckover)

Available options

  • 27 and 29 ft tri-axle option
  • 8,000 lb axles with 17.5" tires
  • Slipper springs or Torflex axles, surge brakes
  • Fifth wheel with 2 5/16" ball
  • 8,000 lb electric winch installed
  • Hot-dip galvanized
  • Pintle hitch, 12,000 lb jack, breakaway kit
  • LED lights, spare tire and mount

At work and in service

Load on flat ground, centre the machine on the deck and tie it down at all four corners before driving. On a Power Tilt, keep the 12 volt pack’s battery charged and check the oil and hoses.

Grease the deck pivot point, and have the brakes, bearings, tires and lights inspected once a year. Our shop does this service and also installs winches and tie-down rails.

Ordering at Martin Remorques

Tell us the machines you haul, their weight and their width: we choose with you the Gravity, Power or Deckover, the length and the axles.

Martin Remorques orders this trailer from Weberlane in the configuration chosen with you. We first check that it suits your vehicle, your load and your use, we prepare the order with the manufacturer and we give you the expected delivery date. You can come and see the trailers in stock at our dealership, 270, route 343, in Saint-Ambroise-de-Kildare, Monday to Friday, 8 am to 5 pm.

For financing, we work with National Bank of Canada for individuals and Mitsubishi HC Capital Canada for businesses: we prepare the application with you; the institution approves it and sets the rate. Financing

After the purchase, our shop services and repairs your trailer: bearings, brakes, suspension, lights, wiring and hydraulics. Our parts and accessories department orders the parts you need, and we install the equipment that makes the trailer more practical, such as a winch, tie-down rails or a storage box. Service

WEBERLANE IN PHOTOS

More views

Tilt-N-Load trailers, view 2
Tilt-N-Load trailers, view 3
QUOTE

Your Weberlane quote

Weberlane tilt-N-Load trailers: tell us what you haul and with what vehicle. We suggest the model and its options, with its price.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

We call you back with a proposal and its price.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Gravity Tilt or Power Tilt?

The Gravity tilts with no battery for one well-balanced machine. The Power, with its hydraulic pack, controls the deck for several machines or heavy attachments.

What capacity do Tilt-N-Load trailers have?

From 3.5 to 10 tons depending on the model.

My machine is too wide for the fenders: what then?

Choose a Deckover: the full-width deck sits above the wheels.

Is the Tilt-N-Load available as a gooseneck?

Yes, a fifth wheel with a 2 5/16" ball is available as an option on the Deckover Gravity Tilt.

Can a winch be added?

Yes, an installed 8,000 lb electric winch.

Can the Tilt-N-Load be galvanized?

Yes, hot-dip galvanizing is available as an option.

Is there a brochure?

Yes, Weberlane publishes the 2024 Tilt-N-Load brochure. The Martin Remorques team uses it to give you the models, sizes and equipment, at the dealership or over the phone.

How do I get the price of a Weberlane trailer?

Fill in the quote form on this page or call us at 450 759-0472. Tell us the configuration you want: we call you back with the model, the options and the price, Monday to Friday, 8 am to 5 pm.

Does Martin Remorques service Weberlane trailers?

Yes. Our shop in Saint-Ambroise-de-Kildare services and repairs trailers: bearings, brakes, suspension, lights, wiring and hydraulics. Our parts department orders the replacement parts you need.

Let’s talk it through

Your next trailer
Shall we talk?

Tell us what you haul: we find the right model and its options, and we give you its price.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm