Laroche ATV and side-by-side trailers
Laroche’s ATV and side-by-side trailers are 66 in. wide, with 13 in. sides and a ramp or a rear panel that doubles as a ramp. The SPYDER66X10, with its lowered floor, is designed for three-wheel motorcycles.

2 trailers of this type in stock
The 4 models to order
Not in the yard? Martin Remorques orders this trailer from Laroche in the configuration chosen with you.
GAT66X10
66 in. × 10 ft, two 2,000 lb axles, 13 in. sides and top rail, treated planks, 4,000 lb
GAS66X10
Single axle, 13 in. solid metal sides, 3,500 lb, 12 ft and 73¼ in. width optional
GA66X14
66 in. × 14 ft, mesh rear gate, fender steps, 4,000 lb, 73¼ in. width optional
SPYDER66X10
66 in. × 10 ft, 4 in. drop axle, 48 in. ramp gate, aluminum toolbox, 3,500 lb
Four models
The 66 in. × 10 ft GAT66X10 has two 2,000 lb axles, 13 in. sides with a top rail and a treated plank floor; Laroche rates it at 4,000 lb, enough for a side-by-side and its gear.
The single-axle GAS66X10 has 13 in. solid metal sides, a reinforced stake on each side and a 3,500 lb capacity; it also comes in 12 ft and widens to 73¼ in. The 66 in. × 14 ft GA66X14 has a full mesh rear gate, steps on the fenders, a 4,000 lb capacity, and widens to 73¼ in. as well.
The SPYDER66X10 has 13 in. solid sides, a 48 in. high rear ramp gate, a 4 in. drop axle that lowers the floor, a 31 × 10 × 14 in. aluminum toolbox, a 13 in. spare tire and a 3,500 lb capacity.
Why 66 in.
A 66 in. width takes an ATV or a side-by-side while keeping the trailer narrow enough to follow the vehicle. For a wider machine, the GAS66X10 and the GA66X14 widen to 73¼ in.: measure your machine, wheels included, before you choose, and leave room for the straps.
In practice
A hunter takes an ATV and gear to camp on a GAT66X10: the machine drives up the ramp, and the 13 in. sides hold in the bags and fuel cans. The longer GA66X14 leaves room for a side-by-side and all of its gear, coolers and tools included.
The owner of a three-wheel motorcycle takes the SPYDER66X10: its lowered floor and 48 in. ramp gate make loading easier, and the toolbox keeps the straps and the helmet dry and out of sight.
Good to know
Place the ATV or side-by-side so its weight sits slightly ahead of the axle: the trailer tracks straight and the hitch keeps good tongue weight. On a single-axle trailer such as the GAS66X10, this matters even more, because one axle carries the whole load and the trailer reacts quickly to a badly placed machine.
The models
- GAT66X1066 in. × 10 ft, two 2,000 lb axles, 13 in. sides and top rail, treated planks, 4,000 lb
- GAS66X10Single axle, 13 in. solid metal sides, 3,500 lb, 12 ft and 73¼ in. width optional
- GA66X1466 in. × 14 ft, mesh rear gate, fender steps, 4,000 lb, 73¼ in. width optional
- SPYDER66X1066 in. × 10 ft, 4 in. drop axle, 48 in. ramp gate, aluminum toolbox, 3,500 lb
Standard equipment
- Galvanized steel
- 66 in. wide
- 13 in. tires
- 13 in. sides, solid metal on the GAS66X10 and SPYDER66X10
- Treated plank floor (GAT66X10, SPYDER66X10)
- Fender steps (GA66X14)
Available options
In service
Strap the ATV or side-by-side down at all four corners with ratchet straps, parking brake on, and check the straps after the first few kilometres.
Rinse off the salt and mud in spring; once a year, have the bearings and lights checked. Our shop does this service and our parts department sells straps.
Ordering at Martin Remorques
Tell us your machine, its width and its weight: we choose the model and the width with you.
Martin Remorques orders this trailer from Laroche in the configuration chosen with you. We first check that it suits your vehicle, your load and your use, we prepare the order with the manufacturer and we give you the expected delivery date. You can come and see the trailers in stock at our dealership, 270, route 343, in Saint-Ambroise-de-Kildare, Monday to Friday, 8 am to 5 pm.
For financing, we work with National Bank of Canada for individuals and Mitsubishi HC Capital Canada for businesses: we prepare the application with you; the institution approves it and sets the rate. Financing
After the purchase, our shop services and repairs your trailer: bearings, brakes, suspension, lights, wiring and hydraulics. Our parts and accessories department orders the parts you need, and we install the equipment that makes the trailer more practical, such as a winch, tie-down rails or a storage box. Service
More views


Your Laroche quote
Laroche ATV and side-by-side trailers: tell us what you haul and with what vehicle. We suggest the model and its options, with its price.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
Does a side-by-side fit on a 66 in. trailer?
An ATV and many side-by-sides, yes; for a wider machine, the GAS66X10 and GA66X14 widen to 73¼ in. Measure it wheels included.
What is the SPYDER66X10?
A 66 in. × 10 ft trailer designed for three-wheel motorcycles, with a 4 in. drop axle, a 48 in. ramp gate and an aluminum toolbox.
What capacity do these trailers have?
From 3,500 lb for the GAS66X10 and SPYDER66X10 to 4,000 lb for the GAT66X10 and GA66X14.
How do I get the price of a Laroche trailer?
Fill in the quote form on this page or call us at 450 759-0472. Tell us the configuration you want: we call you back with the model, the options and the price, Monday to Friday, 8 am to 5 pm.
Does Martin Remorques service Laroche trailers?
Yes. Our shop in Saint-Ambroise-de-Kildare services and repairs trailers: bearings, brakes, suspension, lights, wiring and hydraulics. Our parts department orders the replacement parts you need.
Your next trailer
Shall we talk?
Tell us what you haul: we find the right model and its options, and we give you its price.




