Galvanized, white and aluminum trailer wheels
A trailer wheel carries part of the weight of the trailer and its load, and has to suit the hub, the tire and the fender. It is chosen by its diameter, bolt pattern, load rating and finish, from the small 8 in. wheel of a light trailer to the 16 in. wheel of a deckover.

Choose your part
Three finishes
A galvanized wheel resists rust best: it is the choice for boat trailers and trailers driven on salted winter roads. A white or painted wheel, spoke or modular, is economical and common on utility trailers. An aluminum wheel is lighter, does not rust and gives a camper or an enclosed trailer a sharp look.
Aluminum wheels need nuts made for them and careful torque; steel wheels take ordinary cone nuts. The two nut types are never mixed.
DexterWH167-8AHD Dexter Series 02 aluminum wheel, 16 x 7 in., 8 on 6.5 in.Bolt pattern and center bore
The bolt pattern gives the number of studs and the circle they sit on: 4 on 4 in. for small trailers, 5 on 4 1/2 in. for 3,500 lb axles, 6 on 5 1/2 in. for 5,200 and 6,000 lb, 8 on 6 1/2 in. for 7,000 lb. The wheel’s center bore also has to fit over the hub.
Offset places the rim more or less outward: the wrong offset makes the tire rub on the fender or the frame. Keeping the same offset as the original wheels avoids surprises.
DexterWH1455-5A-14S Dexter Series 14 aluminum wheel, 14 x 5.5 in., 5 on 4.5 in.Load rating
Every wheel has a marked load rating, often stamped inside the rim: it has to equal or exceed that of the tire mounted on it. A light utility wheel under a high-capacity tire becomes the trailer’s weak point.
Faucher6270067 black rubber mud flap, 24 x 24 in.In practice
A camper owner replaces rusty steel wheels with aluminum wheels of the same size, with new nuts, has them torqued, then retorqued after the first few kilometres. An angler switches to galvanized wheels on the boat trailer.
Faucher6272434 black rubber mud flap, 30 x 24 in.Good to know
A trailer wheel is not a car wheel: even if the bolt pattern matches, a car wheel often has neither the load rating nor the offset a trailer needs. Trailer wheels carry their rating stamped on them and are built for the constant vertical load of a trailer, mile after mile.
Faucher6272561 chrome anti-sail mud flap bracket, 24 x 30 in.Worth remembering
For a boat trailer, galvanized wheels and good quality nuts stand up better to repeated launching; a fresh water rinse after every outing extends their life and keeps the nuts easy to remove when a tire needs changing.
Demco15850 Demco stake pocket spare tire holderCommon bolt patterns
- 4 sur 4 poSmall light trailers, 8 to 12 in. wheels
- 5 sur 4 1/2 po3,500 lb axles, 13 to 15 in. wheels
- 6 sur 5 1/2 po5,200 and 6,000 lb axles, 15 and 16 in. wheels
- 8 sur 6 1/2 po7,000 lb and heavier axles, 16 in. wheels
What we can order
- Galvanized wheels
- White and painted spoke or modular wheels
- Aluminum wheels
- 8 to 16 in. wheels
- Cone nuts and aluminum wheel nuts
- Hub covers and center caps
Care
Lug nuts are retorqued after the first 15, 40 and 80 km on a new or remounted wheel, then at every service. Rinse salt off steel wheels to delay rust.
Replace a wheel that is bent, cracked or deeply rusted around the studs.
Demco15884 Demco stake pocket spare tire holder, 4 in. offsetOrdering at Martin Remorques
Bring the diameter, bolt pattern and offset, or bring the trailer in: we find the wheel and mount it with its tire.
Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.
Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.
You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Request a part
Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
Galvanized or aluminum?
Galvanized for rust and price, aluminum for weight and looks; both stand up well to salt.
How do I find my bolt pattern?
Count the studs and measure the circle through their centers; we can measure it for you.
Do the lug nuts need retorquing?
Yes, after the first few kilometres on a new or remounted wheel.
Do you sell wheels on their own?
Yes, on their own or mounted with a tire, ready to bolt on, including a matching spare if you want one.
How do I order a part from Martin Remorques?
Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.
Can Martin Remorques install the part?
Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.
Your next project
Let’s talk
A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.


