Tow bars for flat towing
A tow bar connects a car, an SUV or a jeep to the back of a motorhome, with all four wheels on the ground. No trailer needed: the car follows the RV and is there for errands and outings once you set up camp.

Choose your part
A complete setup
The bar alone is not enough. You need a base plate fixed under the front of the car, made for that exact model, the tow bar itself, which hitches to the RV receiver, two safety cables, wiring that lights the car’s lamps with the RV’s, and often a supplemental braking system.
Blue Ox and Demco make folding tow bars that stay on the RV when the car is unhitched, base plates for a wide range of vehicles and the matching wiring kits. Our shop installs the base plate, the wiring and the supplemental braking on the car.
Curt70015 Rambler RV tow bar, 7,500 lbCan the car be flat towed?
Not every car can be towed with four wheels down: some automatic transmissions and some all-wheel drive systems get damaged if they roll with the engine off. The owner’s manual says whether the car can be flat towed, and what to do before leaving, such as shifting to neutral or pulling a fuse.
If the car cannot be flat towed, a tow dolly or a car hauler trailer takes over.
Curt70012 Seeker RV tow bar, 10,000 lbChoosing a tow bar
The tow bar rating has to cover the car’s weight, and its height should keep the bar nearly level: a drop receiver makes up the difference between the RV receiver and the car’s base plate. A bar mounted on the RV can be hitched by one person, even if the two vehicles are not perfectly lined up.
Curt19750 universal tow bar with 2 in. couplerIn practice
A couple heading south in a motorhome for the winter has a base plate and wiring installed on their small SUV, and adds a supplemental brake. At the campground, the car unhitches in a few minutes and is used for groceries and sightseeing.
Curt13902 Class 3 multi-fit hitch, 2 in. receiverHitching and unhitching
The car pulls up behind the RV, the tow bar arms unfold and hook to the base plate points, then the safety cables and the electrical cord plug in. The arms lock on their own at the first turn or after a few metres straight ahead. To unhitch, you release the arms, even if the car is at an angle, which saves a lot of back-and-forth at a busy campground entrance.
Before leaving, the car is put in the towing mode its manufacturer specifies, and the key stays in the right position so the steering wheel turns freely. A few metres of driving confirm that the lights, brakes and steering follow the RV as they should.
Curt15511 Class 5 multi-fit hitch, 2 in. receiverWhat we can order
- Folding tow bars (Blue Ox, Demco)
- Base plates made for your car
- Safety cables
- Wiring kits and diodes for the car’s lights
- Drop receivers
- Tow bar covers and locks
Care
Clean and lubricate the tow bar arms as the manufacturer recommends, and keep it under its cover: sand and salt wear the slides. Check the cables and wiring every time you hitch up.
Have the tow bar and base plate inspected every season, especially after a long trip.
Curt12923 Class 2 multi-fit hitch, 1 1/4 in. receiverOrdering at Martin Remorques
Tell us the car to tow and the RV pulling it: we order the base plate, tow bar, wiring and supplemental brake, and install them.
Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.
Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.
You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Request a part
Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
Can my car be towed four wheels down?
The owner’s manual says so; many cars allow it, others need a tow dolly or a trailer.
Is a supplemental brake needed?
It is strongly recommended: the car brakes with the RV instead of pushing it.
Is the base plate visible?
Barely: most hide behind the bumper, with removable attachment points.
How do I order a part from Martin Remorques?
Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.
Can Martin Remorques install the part?
Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.
Your next project
Let’s talk
A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.















