Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · HITCHES AND BRAKING

Weight distribution and sway control

A heavy camper on a ball squats the back of the vehicle and lightens the front. Weight distribution sends that weight back to both axles, and sway control calms the swaying caused by wind and passing trucks.

Weight distribution and sway control

How it works

The weight distribution head replaces the ball mount. Two spring bars run from the head to the trailer frame, where brackets put them under tension. As they flex, they lift the back of the vehicle and send part of the weight to the front axle and to the trailer axles.

The vehicle stays level, steering and braking keep their grip on the road, and the headlights light the road instead of the sky.

17200 friction sway control kitCurt17200 friction sway control kit

Controlling sway

Sway control slows the trailer’s side-to-side movement: a friction bar is added to the hitch, or control is built into the head and bars. Blue Ox makes the SwayPro, a weight distribution hitch with built-in sway control, and Curt makes round and trunnion bar systems with sway control.

Sway control does not replace a well loaded trailer: about 10 to 15% of the weight on the tongue, and the heavy items over the axles.

17201 trailer-mount ball for sway controlCurt17201 trailer-mount ball for sway control

When you need one

The vehicle manual often says so: above a certain trailer weight, weight distribution is required to reach the advertised towing capacity. That is the case for many SUVs and pickups pulling a travel trailer.

40093 replacement 1 1/4 in. sway control ballCurt40093 replacement 1 1/4 in. sway control ball

In practice

A family pulling a 7,000 lb camper with a half-ton pickup has a weight distribution hitch with sway control installed: the truck stays level and no longer gets pushed around by the wind on the highway. Our shop sets the bar tension for the real weight.

BXW1275 2-point weight distribution hitch, 1,200 lbBlue OxBXW1275 2-point weight distribution hitch, 1,200 lb

Tongue weight

The setup depends on the loaded trailer’s tongue weight, measured at a public scale or with a tongue weight scale. Bars are chosen by range, for example 600 to 1,000 lb or 1,000 to 1,400 lb.

Bars that are too strong make the ride harsh and stress the hitch; bars that are too weak do not bring the vehicle back to level. The right setup brings the front of the vehicle close to its unhitched height.

Some vehicles with air suspension or automatic leveling need a specific setup, described in the manufacturer’s manual.

13902 Class 3 multi-fit hitch, 2 in. receiverCurt13902 Class 3 multi-fit hitch, 2 in. receiver

What we can order

  • Round and trunnion bar weight distribution systems
  • Systems with built-in sway control (Blue Ox SwayPro)
  • Friction sway control bars
  • Replacement heads, bars and brackets
  • Setup for the trailer’s weight

Care

Grease the ball and the bar contact points as the manufacturer recommends, and check bracket tightness at the start of the season.

Have the setup redone if you change vehicles, trailers or the way you load.

15511 Class 5 multi-fit hitch, 2 in. receiverCurt15511 Class 5 multi-fit hitch, 2 in. receiver

Ordering at Martin Remorques

Tell us your vehicle and your loaded camper’s weight: we choose the system, install it and set it up.

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers of this part type

Curt

Curt

Maker of hitches, ball mounts, wiring harnesses and brake controllers.

17200 friction sway control kit17201 trailer-mount ball for sway control40093 replacement 1 1/4 in. sway control ball
Blue Ox

Blue Ox

Tow bars, baseplates, weight distribution hitches and supplemental braking.

BXW1275 2-point weight distribution hitch, 1,200 lbBXR2100 Blue Ox gooseneck to fifth wheel hitch

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Does weight distribution raise towing capacity?

No, but it is often required to reach the manufacturer’s advertised capacity.

Is sway control needed too?

Some systems build it in; otherwise a friction bar is added.

Who does the setup?

Our shop does it for your loaded trailer’s weight.

Should sway control come off to back up?

With a friction bar, loosen or remove it for tight manoeuvres and on slippery pavement; an integrated system often does not need it. The manufacturer’s instructions say which applies to yours.

Will the system fit my trailer?

It fits most A-frame tongues; we check yours, including the propane tanks and the battery box, so the brackets and bars clear everything mounted on the tongue.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm