N&N Buffalo gooseneck deckovers
The Buffalos are N&N’s one-piece gooseneck deckover platforms, for heavy job site loads. Four models, from the Buffalo H8 Junior, light enough for a one ton truck, to the Buffalo CF Ultimate with a hydraulic tilt deck.

Not in the yard right now
Here’s what we have that’s close
The 4 models to order
Not in the yard? Martin Remorques orders this trailer from N&N in the configuration chosen with you.
Buffalo H8 Junior
18 to 22 ft + 4 ft, 2 or 3 axles, 9,875 to 18,625 lb payload
Buffalo H12 Max
30,000 lb GVWR, 2 × 12,000 or 2 × 15,000 lb, 37" deck height, 20 to 30 ft + 5 ft, about 19,600 to 21,900 lb
Buffalo CF Ultimate
22 to 28 ft deck + 12 ft hydraulic tilt, 2 × 16,000 lb, about 27,400 to 29,300 lb payload
The one-piece gooseneck
The gooseneck transfers part of the weight onto the truck’s rear axle: the trailer is steadier, turns tighter and carries more than a bumper-pull trailer. The Buffalo’s gooseneck is made in one piece, light and strong.
The Buffalo H8 Junior carries 9,875 to 18,625 lb, up to 21,000 lb of cargo on three axles. The Buffalo H12 Max has a 30,000 lb GVWR, a 37" deck height for easier loading, and a gooseneck option adapted to dump trucks.
Premium and Ultimate
The Buffalo CF Premium is the most advanced of N&N’s platforms, hot-dip galvanized and now offered with three 15,000 lb axles for extreme loads. The Buffalo CF Ultimate has a 22 to 28 ft deck and a 12 ft hydraulic tilt section: heavy machinery drives on with no ramps, and it carries about 27,400 to 29,300 lb on two 16,000 lb axles.
In practice
An excavation or snow removal company that moves a wheel loader or a larger excavator picks the Buffalo: the gooseneck transfers part of the load onto the truck, and the trailer stays steady at highway speed. With the H12 Max’s dump truck option, the same truck pulls the trailer and hauls material, so the company gets more work out of one vehicle.
The CF Ultimate is for heavy machinery that gets loaded often: its 12 ft hydraulic tilt section does away with ramps and speeds up loading on job sites, with less risk of a machine slipping on a wet ramp.
Good to know
The gooseneck hitch mounts in the truck bed, over or slightly ahead of the rear axle. Before the first trip, have it checked to make sure it suits your truck and the trailer’s GVWR, and that the truck’s own ratings cover the weight it will carry on its rear axle once the trailer is loaded.
The models
- Buffalo H8 Junior18 to 22 ft + 4 ft, 2 or 3 axles, 9,875 to 18,625 lb payload
- Buffalo H12 Max30,000 lb GVWR, 2 × 12,000 or 2 × 15,000 lb, 37" deck height, 20 to 30 ft + 5 ft, about 19,600 to 21,900 lb
- Buffalo CF PremiumThe most advanced model, up to 3 × 15,000 lb
- Buffalo CF Ultimate22 to 28 ft deck + 12 ft hydraulic tilt, 2 × 16,000 lb, about 27,400 to 29,300 lb payload
Standard equipment
- Hot-dip galvanized steel and hemlock floor
- One-piece gooseneck
- 102" deck above the wheels
- 4 or 5 ft dovetail, or 12 ft tilt section (Ultimate)
- Electric brakes, or electric-hydraulic on the Ultimate
Available options
At work and in service
Check the gooseneck hitch and pin before each trip, and spread the load to keep good weight on the hitch. Tie down machinery with chains and binders rated for its weight, at the intended points.
On the Ultimate, check the hydraulic oil and hoses. Have the brakes, hubs, suspension and tires inspected on the maintenance schedule. Our shop does this service.
Ordering at Martin Remorques
Tell us your truck, its hitch and the machinery you haul: we choose with you the Buffalo model, the length and the axles.
Martin Remorques orders this trailer from N&N in the configuration chosen with you. We first check that it suits your vehicle, your load and your use, we prepare the order with the manufacturer and we give you the expected delivery date. You can come and see the trailers in stock at our dealership, 270, route 343, in Saint-Ambroise-de-Kildare, Monday to Friday, 8 am to 5 pm.
For financing, we work with National Bank of Canada for individuals and Mitsubishi HC Capital Canada for businesses: we prepare the application with you; the institution approves it and sets the rate. Financing
After the purchase, our shop services and repairs your trailer: bearings, brakes, suspension, lights, wiring and hydraulics. Our parts and accessories department orders the parts you need, and we install the equipment that makes the trailer more practical, such as a winch, tie-down rails or a storage box. Service
More views


Your N&N quote
N&N Buffalo gooseneck deckovers: tell us what you haul and with what vehicle. We suggest the model and its options, with its price.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
Can a one ton truck pull a Buffalo?
The Buffalo H8 Junior is light enough for a one ton truck with a gooseneck hitch; the total weight must stay within its capacity.
Which Buffalo needs no ramps?
The Buffalo CF Ultimate, with its 12 ft hydraulic tilt section.
What is the Buffalo H12 Max’s GVWR?
30,000 lb, with 12,000 or 15,000 lb axles.
How do I get the price of a N&N trailer?
Fill in the quote form on this page or call us at 450 759-0472. Tell us the configuration you want: we call you back with the model, the options and the price, Monday to Friday, 8 am to 5 pm.
Does Martin Remorques service N&N trailers?
Yes. Our shop in Saint-Ambroise-de-Kildare services and repairs trailers: bearings, brakes, suspension, lights, wiring and hydraulics. Our parts department orders the replacement parts you need.
Your next trailer
Shall we talk?
Tell us what you haul: we find the right model and its options, and we give you its price.





