Couplers, jacks and trailer equipment
The trailer coupler connects it to the ball; the jack holds it up when unhitched; ramps, glides and the dump pump are used to load and empty it. Martin Remorques orders these Curt, Demco and Buyers Products parts through its suppliers, and our shop installs or welds them.

Choose your part
The parts at the front of the trailer
The coupler bolts or welds to the end of the tongue and takes a 1 7/8, 2 or 2 5/16 in. ball. On a boat trailer, the hydraulic surge coupler makes the trailer brake when it pushes on the vehicle. The jack, crank or electric, lifts the tongue to hitch up and holds it unhitched; stabilizer legs support the back during loading.
Our suppliers’ catalogue covers standard and hydraulic couplers and their components, jacks, feet and accessories, stabilizers, portable ramps, snowmobile glides and mats, boat rollers and bunks, hand winches and hydraulic pumps for dump trailers.
Curt25153 straight-tongue coupler, 2 in. ball, Posi-Lock, 2 in. channel, 3,500 lbWhen to replace them
A coupler with play on the ball, a latch that no longer locks or a tongue cracked around the coupler gets fixed before the next trip. A jack that binds, creeps down on its own or has a broken wheel gets replaced: it is often what holds the trailer above someone’s feet while hitching.
Demco8705001 Demco DA70 surge actuator for drum brakes, 7,000 lbIn practice
A utility trailer owner replaces a worn coupler and a seized jack with a Curt coupler and a swivel jack with a wheel, installed in an hour. A contractor adds an electric jack on a large enclosed trailer to hitch without cranking, and stabilizer legs at the back.
Curt25006 pipe-mount swivel jack, top handle, 5,000 lbThe hitch, part by part
Hitching a trailer puts several parts end to end: the vehicle hitch, the ball mount and ball, the trailer coupler, the safety chains, the breakaway cable and the electrical connector. The coupler and the jack are on the trailer side, and they wear like everything else. Checking them at the yearly service avoids bad surprises at departure time.
For a dump trailer, the pump and its battery are the other key part: a box that will not lift sidelines the trailer, even if everything else is fine. For a boat trailer, the surge coupler and the rollers need the most attention, because of the water.
Erickson07441 center-folding arched aluminum ramp, 12 x 90 in., 750 lbAt Martin Remorques
Our shop installs bolted and welded couplers, jacks and stabilizers, repairs surge couplers and bleeds their brakes, redoes boat rollers and bunks, and repairs dump trailer hydraulics. Our counter orders the parts from our suppliers, and hands them to you ready to fit if you would rather do the work yourself.
Curt25210 A-frame coupler, 2 in. ball, Posi-Lock, 5,000 lbWorth remembering
The parts on a new trailer sold here are already known to our shop: coupler, jack and pump are ordered without searching, which shortens the wait when something needs replacing in the middle of the season and keeps the trailer working.
Demco8669113 Demco DA91 surge actuator for disc brakes, 8,000 lbOrdering at Martin Remorques
Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.
Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.
You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Manufacturers in this family
Buyers ProductsBuyers Products
Work truck equipment: toolboxes, warning lights, hitches and snowplow parts.
The availability of a part and of each model is confirmed with the team before ordering.
Request a part
Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
Can you weld on a new coupler?
Yes, our shop bolts or welds the coupler to the tongue, depending on the model.
Which jack for my trailer?
One whose rating exceeds the loaded trailer’s tongue weight.
Do you sell surge coupler parts?
Yes, hydraulic surge couplers and their components.
How long does a coupler replacement take?
Often under an hour for a bolted coupler, a little longer for a welded one, which also gets painted to protect the weld from rust.
Are parts ordered quickly?
Most arrive within a few days from our suppliers, and common coupler, jack and pump parts are often on the shelf at the counter.
How do I order a part from Martin Remorques?
Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.
Can Martin Remorques install the part?
Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.
Your next project
Let’s talk
A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.








