Trailer wheels and fenders
Wheels carry the trailer, fenders protect it and the vehicles behind it, and the spare saves it from a flat on the roadside. Martin Remorques orders galvanized, white and aluminum wheels, steel, aluminum and plastic fenders, and every wheel and tire accessory from its suppliers.

Choose your part
Three groups of parts
Trailer wheels are chosen by their diameter, from 8 to 16 in., their bolt pattern, their load rating and their finish. Fenders are chosen by their shape, single or tandem, their material and their size, which has to cover the tire with enough clearance. Accessories complete it all: spare tire carriers and covers, chocks, valves, gauges, inflators, tubes, spacers and hub covers.
Our suppliers’ catalogue groups these parts: steel, aluminum and plastic fenders, wheel locks and chocks, tubes, inflators, cones, tire covers, hub covers, repair kits, spacers, gauges, flat-free tires, aluminum, white and galvanized wheels, spare tire carriers and valves.
DexterWH167-8AHD Dexter Series 02 aluminum wheel, 16 x 7 in., 8 on 6.5 in.The measurements that matter
For a wheel, you need the diameter, the rim width, the bolt pattern, for example 5 on 4 1/2 in., and the offset, which places the wheel under the fender. For a fender, you need the tire diameter and width, and the distance between the wheels of a tandem. With those measurements, or a photo and the trailer, we find the right part.
Faucher6270067 black rubber mud flap, 24 x 24 in.In practice
A boat trailer owner replaces rusty painted wheels with galvanized ones, and adds a locking spare tire carrier on the tongue. A landscaper whose fender was torn off by a stump gets a tougher aluminum step fender, installed by our shop with its lights.
Demco15850 Demco stake pocket spare tire holderLug nut torque
A poorly tightened trailer wheel is one of the most common causes of wheels lost on the road. Lug nuts are tightened in a star pattern, to the torque set for the wheel and studs, then retightened after the first 15, 40 and 80 km, while the wheel seats on the hub. Our shop torques wheels with a torque wrench and notes the retorque to do.
Worn, stretched or damaged studs are replaced along with the wheel: a new nut on a tired stud holds no better than the old one.
DexterWH1455-5A-14S Dexter Series 14 aluminum wheel, 14 x 5.5 in., 5 on 4.5 in.Tires and wheels together
Trailer tires, marked ST, are built to carry heavy loads and track straight, with stiffer sidewalls than car tires. Their load rating and maximum pressure are on the sidewall. We mount and balance tires on wheels, and check that the wheel and tire ratings properly cover the trailer’s load.
A trailer tire ages even if it is driven little: sun and time crack it. It is replaced after a few years, even if its tread still looks good.
Faucher6272434 black rubber mud flap, 30 x 24 in.Worth remembering
A trailer that sleeps all winter is parked on firm ground, tires inflated, and moved a few feet in spring before the first trip: the tires do not keep a flat spot and the bearings wake up gently. A quick look at the wheels, nuts and tire pressure then takes five minutes and catches most problems before they happen on the road.
Demco15884 Demco stake pocket spare tire holder, 4 in. offsetOrdering at Martin Remorques
Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.
Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.
You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Request a part
Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
Should wheels be replaced with the tires?
Not always: a sound wheel is kept; a rusted, bent or cracked wheel is replaced.
Can you fit a fender on my trailer?
Yes, our shop installs and welds fenders, and reconnects the lights they carry.
Where is my tire size?
On the tire sidewall, for example ST205/75R15.
Do you mount tires on wheels?
Yes, we mount, balance and install tires and wheels on your trailer, and torque the nuts before it leaves the shop.
Do you keep wheels in stock?
The common sizes, yes; others are ordered quickly from our supplier, usually within a few days, and we call you as soon as they arrive.
How do I order a part from Martin Remorques?
Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.
Can Martin Remorques install the part?
Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.
Your next project
Let’s talk
A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.




