Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · HOOKS AND SHACKLES

Winch hooks

The hook finishes the winch cable or rope and catches the anchor, the shackle or the snatch block. It is the part you handle on every pull: it has to be strong, easy to hold with gloves on and made for the line it carries.

Winch hooks

Latch or clevis hook

A latch hook, the most common, ends in an eye that takes the steel cable’s loop, with a spring latch that closes its throat. A clevis hook bolts to a thimble or to the eye of a synthetic rope and comes off without cutting the line, handy for changing hooks or running the line through a block.

Warn makes hooks and clevises for its truck and ATV winches, with a grip big enough to hold with gloves on, and the matching hook stoppers.

92089 Warn Epic winch hook, winches up to 5,000 lbWarn92089 Warn Epic winch hook, winches up to 5,000 lb

The hook stopper

A hook stopper, a rubber or plastic block on the line just ahead of the hook, keeps the hook from slamming into the fairlead at the end of spooling. On an ATV lifting a plow, it prevents crushing the hook and breaking the fairlead or the contactor.

A pull strap attached to the hook keeps fingers away from the fairlead while spooling in the last few feet of line: a simple habit that prevents many injuries.

92090 Warn Epic winch hook, winches up to 12,000 lbWarn92090 Warn Epic winch hook, winches up to 12,000 lb

Choosing the right hook

The hook has to be rated at least as high as the winch, and suit the line: an eye for steel cable, a clevis for synthetic rope. For an ATV, a lighter hook that is easier to grab makes the winch more practical every day.

98426 Warn standard replacement hook for mid-frame winchesWarn98426 Warn standard replacement hook for mid-frame winches

In practice

An ATV owner switching to synthetic line replaces the eye hook with a clevis hook and adds a hook stopper. A mechanic with a winch on the car hauler keeps a spare hook, in case the latch breaks in the middle of winter.

89541 Warn AXON replacement hook and strapWarn89541 Warn AXON replacement hook and strap

Good to know

The hook is never wrapped back onto the line itself: it crushes cable and cuts rope. It goes onto a shackle, a tree saver strap or an anchor point made for pulling, throat facing up so the latch does not carry the load. Hooking back onto the line also halves the rating you can count on.

69645 Warn winch hook strapWarn69645 Warn winch hook strap

What we can order

  • Latch winch hooks
  • Clevis hooks for synthetic rope
  • Heavy-duty ATV and UTV hooks
  • Hook stoppers
  • Pull straps
  • Replacement latches and pins

Care

Check the latch and the throat after every outing: a bent latch or an opened throat means the hook gets replaced. Rinse off salt and mud.

Replace the hook stopper when it is split: it no longer protects the fairlead.

81270 certified S-hook, 7/16 in., 5,000 lbCurt81270 certified S-hook, 7/16 in., 5,000 lb

Ordering at Martin Remorques

Tell us your winch, its rating and its line: we find the right hook and stopper.

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers of this part type

Warn

Warn

Maker of winches, recovery gear and bumpers.

92089 Warn Epic winch hook, winches up to 5,000 lb92090 Warn Epic winch hook, winches up to 12,000 lb98426 Warn standard replacement hook for mid-frame winches

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Which hook for synthetic rope?

A clevis hook, which bolts to the rope’s eye.

What is a hook stopper for?

It keeps the hook from hitting the fairlead at the end of spooling.

Should the hook match the winch rating?

Yes, at least: it carries the whole pull.

Can the winch’s original hook be replaced?

Yes, if it suits the winch line and rating; we check the fit with the fairlead so the hook and stopper seat properly at the end of the pull.

Does the latch carry the load?

No, it only keeps the hook from slipping off; the load sits in the bottom of the throat. A hook loaded on its latch or its tip can open or break well below its rating.

Should I carry a spare hook?

It is a good idea on long trips, along with a spare clevis pin, since a lost or broken hook leaves the whole winch useless until you get back.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm