Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · CUSTOM CHAIN

Custom chain

A chain of the right length, the right grade and with the right hooks holds a machine on a deck, hitches a trailer safely or serves on the farm and the job site. Martin Remorques cuts chain to length, fits the hooks and hands you an assembly ready to use.

Grade 70 transport chain

Three uses, three chains

Tie-down chain, grade 70, holds a machine or a heavy load on a trailer, with binders. Safety chain connects the trailer to the vehicle and holds it if the coupler comes loose. Custom cut chain covers everything else: gates, farm drags, generators, firewood or anchoring on the job site.

Each use calls for its grade and its hooks, and a chain is never stronger than its weakest part: the hook, the coupling link or the anchor point.

80307 grade 70 transport chain, 5/16 in. x 20 ft, 2 grab hooksCurt80307 grade 70 transport chain, 5/16 in. x 20 ft, 2 grab hooks

Chain grades

The grade tells the strength of the steel. Grade 30 chain, ordinary, is for light uses. Grade 43 chain, a high-strength chain, serves farming and light towing. Grade 70 chain, called transport chain and recognizable by its gold finish, is the one used for tying loads down on trailers. The grade is stamped on the links.

At the same diameter, grade 70 chain carries much more than grade 43: a 3/8 in. grade 70 chain has a working load limit of about 6,600 lb, compared with about 5,400 lb in grade 43.

80031 safety chain, 48 in., 2 S-hooks, 5,000 lbCurt80031 safety chain, 48 in., 2 S-hooks, 5,000 lb

Cut and assembled here

We cut chain by the foot, to the length you want, and fit grab, slip or latch hooks, eye or clevis, of the same grade as the chain. You leave with a chain ready to use, with no extra links dragging on the road.

516CH30 grade 30 chain, 5/16 in., cut by the footFaucher516CH30 grade 30 chain, 5/16 in., cut by the foot

In practice

An excavation contractor orders four 20 ft, 3/8 in. grade 70 chains with grab hooks at both ends, and four matching binders for the mini excavator. A utility trailer owner has rusty, overly long safety chains replaced with chains cut to the right length with latch hooks.

80310 grade 70 transport chain, 3/8 in. x 16 ft, 2 grab hooksCurt80310 grade 70 transport chain, 3/8 in. x 16 ft, 2 grab hooks

A well kept chain

A chain lasts for years if it is stored dry, coiled, away from chemicals and salt. Before a heavy use, run it through your hands link by link: one stretched, nicked, twisted or badly worn link is enough to take it out of service, because the whole chain is only as good as that link.

A chain is never repaired by welding its links or with a bolt. A coupling link of the same grade replaces a damaged piece; beyond that, a new chain costs less than a load lost on the road.

80301 safety chain, 48 in., 2 S-hooks, 7,000 lbCurt80301 safety chain, 48 in., 2 S-hooks, 7,000 lb

Ordering at Martin Remorques

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers in this family

Curt

Curt

Maker of hitches, ball mounts, wiring harnesses and brake controllers.

80307 grade 70 transport chain, 5/16 in. x 20 ft, 2 grab hooks80310 grade 70 transport chain, 3/8 in. x 16 ft, 2 grab hooks80031 safety chain, 48 in., 2 S-hooks, 5,000 lb

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Do you cut chain by the foot?

Yes, to the length you want, and we fit hooks of the same grade.

Which grade to tie down a machine?

Grade 70, with hooks and binders of the same rating.

How can I tell a chain’s grade?

It is stamped on the links; grade 70 chain also has a gold finish.

Do you sell binders with the chains?

Yes, lever and ratchet binders with the same rating as the chain, so the whole tie-down assembly carries one consistent working load limit from the anchor to the machine.

Is galvanized chain stronger?

No, the finish protects against rust; the grade is what gives the strength. A galvanized grade 30 chain is still a light-duty chain, while a gold grade 70 chain is made for tying down machines, even if it rusts sooner outdoors.

Which tie-down chain length should I choose?

Enough to run from the trailer anchor to the machine and back to the binder; 16 to 25 ft covers most trailers, and we cut exact lengths when you prefer chains with no extra links hanging loose.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm