Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · CUSTOM CHAIN

Trailer safety chains

Safety chains connect the trailer to the vehicle under the coupler. If it comes off the ball, they hold the trailer behind the vehicle long enough to stop. They are required, and have to be of the right rating and the right length.

Trailer safety chains

Fitting them properly

The two chains start from the trailer tongue, cross under the coupler and hook to the vehicle hitch loops, one on each side. Crossed, they form a cradle that catches the tongue and keeps it off the pavement if the coupler lets go.

Their length has to let the trailer turn tight corners without the chains going taut, but without them dragging on the ground. A chain rubbing on asphalt wears quickly and throws sparks.

80031 safety chain, 48 in., 2 S-hooks, 5,000 lbCurt80031 safety chain, 48 in., 2 S-hooks, 5,000 lb

The right rating

Each chain has to carry at least the loaded trailer’s gross weight, and so do its hooks. A chain that is too weak or an open S-hook will not hold a heavy trailer when it matters. Curt and Buyers Products make safety chains rated by trailer weight.

The chains attach to the tongue by welding or with bolts and coupling links of equal rating. On a new trailer, they are already in place; on a used trailer, check their condition and rating before the first trip.

80301 safety chain, 48 in., 2 S-hooks, 7,000 lbCurt80301 safety chain, 48 in., 2 S-hooks, 7,000 lb

The hooks

Latch hooks do not come off over a bump and are a good replacement for S-hooks. For a heavy trailer, clevis hooks or quick links of the right rating close completely on the hitch loops.

80303 grade 70 safety chain, 35 in., clevis hook, 12,600 lbCurt80303 grade 70 safety chain, 35 in., clevis hook, 12,600 lb

In practice

A buyer of a used utility trailer has its rusty, too-short chains with half-open S-hooks replaced by new chains of the right length, with latch hooks. A hauler adds quick links on the equipment trailer to hitch it to a new pickup.

80315 safety chain, 35 in., 3/8 in., clevis hook, 16,200 lbCurt80315 safety chain, 35 in., 3/8 in., clevis hook, 16,200 lb

Good to know

Safety chains do not replace a properly closed coupler: before every trip, check that the latch is down, pinned or locked, that the ball is the right size and that the chains and the breakaway cable are hooked up. Those few seconds prevent most trailers coming loose on the road.

If the chains are too long, do not wrap them around the tongue: have them shortened to the right length, by cutting links and refitting the hooks, so they hang evenly on both sides.

80307 grade 70 transport chain, 5/16 in. x 20 ft, 2 grab hooksCurt80307 grade 70 transport chain, 5/16 in. x 20 ft, 2 grab hooks

What we can order

  • Safety chains rated by trailer weight
  • Latch and clevis hooks
  • Quick links and coupling links
  • Chains cut to your trailer’s length
  • Fitting and welding to the tongue

Care

Check the chains and their hooks every time you hitch up, and replace a chain worn by dragging, deeply rusted or with a stretched link.

A little oil on the latches before winter keeps them moving freely.

80310 grade 70 transport chain, 3/8 in. x 16 ft, 2 grab hooksCurt80310 grade 70 transport chain, 3/8 in. x 16 ft, 2 grab hooks

Ordering at Martin Remorques

Tell us your loaded trailer’s weight and bring it in if you can: we cut the chains to the right length and fit the hooks.

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers of this part type

Curt

Curt

Maker of hitches, ball mounts, wiring harnesses and brake controllers.

80031 safety chain, 48 in., 2 S-hooks, 5,000 lb80301 safety chain, 48 in., 2 S-hooks, 7,000 lb80303 grade 70 safety chain, 35 in., clevis hook, 12,600 lb

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Why cross the chains?

To form a cradle that catches the tongue if the coupler comes loose.

What rating do the chains need?

Each one has to carry at least the loaded trailer’s gross weight.

Can I keep the S-hooks?

On a small light trailer, if they are closed; latch hooks are safer.

Does a small trailer need safety chains?

Yes, any trailer hitched to a ball needs safety chains, even a small utility trailer behind a car; they are the last thing holding it if the coupler or the ball lets go.

Are rusty chains still good?

Surface rust, yes; deep rust, pitting or links worn thin by dragging, no, and those chains should be replaced before the next trip.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm