Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · HITCHES AND BRAKING

Fifth wheel hitches

A fifth wheel hitch mounts in the pickup bed and takes the king pin of a fifth wheel camper or trailer. The weight sits over the rear axle: the trailer is stable, even when heavy.

Fifth wheel hitches

Rails or factory prep

On many recent pickups, the manufacturer provides mounting points under the bed floor: the hitch fits on them with a kit made for that truck, without drilling. Otherwise, rails bolted to the frame take the hitch, which comes out to free the bed.

Curt and Demco make fifth wheel hitches in several capacities, with jaws that close around the 2 in. king pin and a head that pivots to follow the road.

BXR2100 Blue Ox gooseneck to fifth wheel hitchBlue OxBXR2100 Blue Ox gooseneck to fifth wheel hitch

Short bed: the sliding hitch

In a short bed, the front of the camper can hit the cab in a tight turn. A sliding hitch moves the head back a few inches for manoeuvring, then returns to its place for the road.

The hitch rating has to cover the weight of the loaded trailer, and the load on the king pin, often 15 to 25% of that weight, has to stay within the truck’s rear axle rating.

GH-8051 Executive Torsion-Flex king pin boxGen-Y HitchGH-8051 Executive Torsion-Flex king pin box

In practice

A couple who spends the summer in a fifth wheel has a hitch installed on the truck’s factory points: the bed is free again in a few minutes for winter. A farmer with a short bed chooses a sliding hitch to turn in the farmyard.

13902 Class 3 multi-fit hitch, 2 in. receiverCurt13902 Class 3 multi-fit hitch, 2 in. receiver

Jaws and comfort

The jaws close around the king pin and lock with a handle; an indicator shows that they are properly closed. A dual-jaw hitch grips the pin from two sides and reduces play and jolts.

Some hitches have a head that pivots fore and aft and side to side, to follow country roads and uneven campground entrances without twisting the camper’s frame.

15511 Class 5 multi-fit hitch, 2 in. receiverCurt15511 Class 5 multi-fit hitch, 2 in. receiver

Hitching up properly

The camper’s pin box plate should sit slightly below the hitch height: as you back up, it slides onto the hitch and the jaws close on the king pin by themselves. A short pull forward, with the trailer brakes on, confirms that everything is locked.

You also need enough room between the top of the bed rails and the underside of the camper’s nose, often 6 in. or more, so the camper does not touch the truck on slopes and in ditches.

12923 Class 2 multi-fit hitch, 1 1/4 in. receiverCurt12923 Class 2 multi-fit hitch, 1 1/4 in. receiver

What we can order

  • Fixed and sliding fifth wheel hitches
  • Kits for factory mounting points
  • Rails and installation hardware
  • Lube plates and grease
  • 7-way extension wiring for fifth wheels
  • Fifth wheel to gooseneck adapters

Care

Grease the hitch plate or use a lube plate, and check the jaws and handle every time you hitch up. Retighten the rail or kit bolts at the start of each season.

Have the hitch inspected at the camper’s yearly service: our shop checks jaw and king pin wear.

76670 Class 3 hitch, 2 in. receiver, Jeep Wagoneer SDraw-Tite76670 Class 3 hitch, 2 in. receiver, Jeep Wagoneer S

Ordering at Martin Remorques

Tell us your truck, its bed length and your camper’s weight: we choose the hitch and the installation kit, and install it.

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers of this part type

Curt

Curt

Maker of hitches, ball mounts, wiring harnesses and brake controllers.

13902 Class 3 multi-fit hitch, 2 in. receiver15511 Class 5 multi-fit hitch, 2 in. receiver12923 Class 2 multi-fit hitch, 1 1/4 in. receiver
Demco

Demco

Tow bars, fifth wheel hitches and supplemental braking systems.

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Does my pickup have factory mounting points?

Many recent pickups do; tell us the year, model and bed length to check.

When is a sliding hitch needed?

With a short bed, so the camper does not hit the cab in tight turns.

Does the hitch come out?

Yes, most come out to free the bed.

What is pin weight?

The share of the camper’s weight that rests on the hitch, often 15 to 25% of the total; it counts against the truck’s payload and rear axle rating.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm