Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · HITCHES AND BRAKING

Class I to V receiver hitches

A receiver hitch bolts under the back of the vehicle and takes the ball mount, the bike rack or the cargo carrier. Martin Remorques orders the hitch made for your vehicle, from Class I for a small car to Class V for a heavy truck, and our shop installs it with its wiring.

Class I to V receiver hitches

The five classes

Hitches are classed by what they can pull. Class I, with a 1 1/4 in. receiver, pulls about 2,000 lb; Class II, with the same receiver, about 3,500 lb. Class III, with a 2 in. receiver, is the most common on SUVs and pickups, up to about 8,000 lb.

Class IV, still at 2 in., goes up to about 10,000 lb, and Class V, with a 2 in. or 2 1/2 in. receiver, serves heavy trucks, at 16,000 lb and more depending on the model. The real capacity is always the lowest of the hitch, the ball, the ball mount and the vehicle ratings.

13902 Class 3 multi-fit hitch, 2 in. receiverCurt13902 Class 3 multi-fit hitch, 2 in. receiver

Made for your vehicle

A receiver hitch is designed for a specific vehicle: it bolts to the points the manufacturer provides, most of the time with no drilling or welding. That is why the make, model, year and sometimes the trim of the vehicle are needed to order the right one.

Curt and Draw-Tite make hitches for the vast majority of cars, SUVs and trucks. Stealth Hitches makes hidden hitches for many European and electric cars and SUVs: the receiver block comes off and nothing shows under the bumper.

On recent vehicles, the wiring often goes through a module that talks to the vehicle’s computer: it powers the trailer lights without overloading the original circuit and avoids error messages on the dashboard.

15511 Class 5 multi-fit hitch, 2 in. receiverCurt15511 Class 5 multi-fit hitch, 2 in. receiver

Front or rear

A front hitch takes a removable winch, a bike rack or a cargo carrier, and helps place a trailer in a tight spot or launch a boat while seeing what you are doing. The rear hitch remains the one used for towing on the road.

12923 Class 2 multi-fit hitch, 1 1/4 in. receiverCurt12923 Class 2 multi-fit hitch, 1 1/4 in. receiver

In practice

An SUV owner who only wants a bike rack takes a Class I or II. Someone towing a 6,000 lb camper takes a Class III or IV with weight distribution. A contractor with a one ton truck takes a Class V for the equipment trailer.

76670 Class 3 hitch, 2 in. receiver, Jeep Wagoneer SDraw-Tite76670 Class 3 hitch, 2 in. receiver, Jeep Wagoneer S

Hitch classes

  • Classe I1 1/4 in. receiver, about 2,000 lb: small cars, bike racks
  • Classe II1 1/4 in. receiver, about 3,500 lb
  • Classe III2 in. receiver, up to about 8,000 lb: SUVs and pickups
  • Classe IV2 in. receiver, up to about 10,000 lb
  • Classe V2 or 2 1/2 in. receiver, 16,000 lb and more depending on the model: heavy trucks

Typical ratings; the exact rating is on the hitch label and never exceeds the vehicle’s.

What we can order

  • Class I to V rear hitches made for your vehicle
  • Front mount hitches
  • Hidden hitches with a removable receiver (Stealth Hitches)
  • Universal hitches and weld-on tubes for trailers and equipment
  • Hitch wiring harnesses and modules
  • Receiver covers

Care

Inspect the hitch bolts once a year and after any hard knock, and clean the receiver: salt and sand wear the shank and the pin.

A receiver cover keeps water and dirt out when the hitch is not in use, and a touch of paint on chips stops rust from setting in.

GH-313 Mega-Duty 10K adjustable drop hitchGen-Y HitchGH-313 Mega-Duty 10K adjustable drop hitch

Ordering at Martin Remorques

Tell us the make, model and year of your vehicle and what you want to tow or carry: we order the right hitch and install it.

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers of this part type

Curt

Curt

Maker of hitches, ball mounts, wiring harnesses and brake controllers.

13902 Class 3 multi-fit hitch, 2 in. receiver15511 Class 5 multi-fit hitch, 2 in. receiver12923 Class 2 multi-fit hitch, 1 1/4 in. receiver

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Which hitch class do I need?

The one that covers the weight of your loaded trailer, without going over your vehicle’s towing capacity.

Does the vehicle need drilling?

Rarely: most hitches bolt to the points the manufacturer provides.

Do you install the wiring?

Yes, our shop installs the hitch and the harness that powers the trailer lights.

Can a hitch go on an electric vehicle?

Yes, if the manufacturer allows it; many electric cars and SUVs have a towing or carrying rating, and Stealth Hitches makes hidden hitches for some of them, with a receiver that comes off when you do not need it and leaves the bumper clean.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm