Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · COUPLERS AND JACKS

Hydraulic surge brake couplers

A hydraulic surge coupler makes the trailer brake with no wiring and no controller: when the vehicle slows, the trailer pushes on the coupler, which pressurizes the brake fluid going to the wheels. It is the system used on most boat trailers.

Hydraulic surge brake couplers

How it works

The coupler slides on a tube: when braking, the trailer moves an inch or two toward the vehicle, and that movement pushes the piston of a master cylinder inside the coupler. The harder the vehicle brakes, the harder the trailer pushes and the more it brakes. Back under way, the coupler returns and the brakes release.

Because it needs no electrical brake hookup, it suits trailers that go in the water and trailers pulled by several different vehicles. Demco makes hydraulic surge couplers for drum and disc brakes, and their replacement parts.

8705001 Demco DA70 surge actuator for drum brakes, 7,000 lbDemco8705001 Demco DA70 surge actuator for drum brakes, 7,000 lb

Reversing

In reverse, the vehicle pushes the trailer and the coupler compresses as if braking. Depending on the model, a manual lockout, or a solenoid driven by the reverse wire of the 5-way connector, blocks the trailer brakes while backing up. Without that lockout, the trailer brakes as soon as you back up a slope.

8669113 Demco DA91 surge actuator for disc brakes, 8,000 lbDemco8669113 Demco DA91 surge actuator for disc brakes, 8,000 lb

Choosing and servicing

The coupler is chosen by the trailer’s rating, the brake type, drum or disc, the ball size and the tongue type. Disc brakes need a coupler made for them. It is completed by a breakaway cable that applies the brakes if the trailer comes loose.

The brake fluid is checked at the start of each season, and the internal damper wears over time: a coupler that clunks or brakes in jerks needs an inspection.

8104002 Demco DA10 weld-on surge actuator for disc brakes, 12,500 lbDemco8104002 Demco DA10 weld-on surge actuator for disc brakes, 12,500 lb

In practice

A boat owner whose trailer braked poorly replaces an old rusted coupler with a new Demco surge coupler and switches to disc brakes, with a solenoid wired to the 5-way so the trailer can back down the launch ramp without stopping.

8101021 Demco DA10 surge actuator for drum brakes, 12,500 lbDemco8101021 Demco DA10 surge actuator for drum brakes, 12,500 lb

Worth remembering

A well kept surge coupler brakes smoothly and progressively; one that brakes too early or in jerks often has a worn damper or air in the lines, both of which our shop fixes in a single visit with the right parts on hand.

25153 straight-tongue coupler, 2 in. ball, Posi-Lock, 2 in. channel, 3,500 lbCurt25153 straight-tongue coupler, 2 in. ball, Posi-Lock, 2 in. channel, 3,500 lb

What we can order

  • Surge couplers for drum and disc brakes (Demco)
  • Reverse lockout solenoids
  • Replacement master cylinders and dampers
  • Breakaway cables
  • Brake lines and fittings
  • Brake fluid

Care

Rinse the coupler with fresh water after every launch, check the fluid level at the start of the season and grease the lube points. A fluid leak or a seized coupler gets fixed before driving.

Have the whole braking system inspected once a year, brakes included.

25210 A-frame coupler, 2 in. ball, Posi-Lock, 5,000 lbCurt25210 A-frame coupler, 2 in. ball, Posi-Lock, 5,000 lb

Ordering at Martin Remorques

Tell us the trailer’s rating, its brakes, the ball size and the tongue: we find the coupler and our shop installs it and bleeds the brakes.

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers of this part type

Demco

Demco

Tow bars, fifth wheel hitches and supplemental braking systems.

8705001 Demco DA70 surge actuator for drum brakes, 7,000 lb8669113 Demco DA91 surge actuator for disc brakes, 8,000 lb8104002 Demco DA10 weld-on surge actuator for disc brakes, 12,500 lb

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Is a brake controller needed with a surge coupler?

No, the coupler brakes on its own from the trailer’s push.

Why does my trailer brake when reversing?

The coupler compresses in reverse; a lockout or a solenoid blocks the brakes while backing up.

Does the coupler suit disc brakes?

It needs a coupler made for discs; we choose the right model.

Does a surge coupler suit a heavy trailer?

Within its rating, yes; beyond that, electric or electric-over-hydraulic brakes suit better, especially for trailers pulled by the same vehicle every time.

Do the brakes need bleeding after installation?

Yes, our shop bleeds the system and checks the braking before the trailer leaves, so there is no air left in the lines.

Can a surge coupler be repaired?

Often, with a rebuild kit for the master cylinder and damper, unless the housing is badly rusted, in which case a new coupler is the better choice.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm