Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · COUPLERS AND JACKS

Loading ramps and accessories

To load an ATV into a pickup, a mower onto a trailer with no ramp or a snowmobile onto a deck, portable ramps, glides and mats bridge the gap. For a boat, rollers and bunks guide it onto its trailer.

Loading ramps and accessories

Portable ramps

Aluminum ramps, straight, arched or folding, hook to the tailgate or the end of the trailer with tabs and store in the bed. Arched ramps keep the underside of a low machine from scraping at the top. Their rating, as a pair, has to exceed the weight of the machine with its rider.

Length matters: the longer the ramp, the gentler the angle. For a pickup with a high tailgate, a 7 to 8 ft ramp reduces the angle and makes loading an ATV much safer.

07441 center-folding arched aluminum ramp, 12 x 90 in., 750 lbErickson07441 center-folding arched aluminum ramp, 12 x 90 in., 750 lb

Snowmobile glides and mats

On a snowmobile trailer, plastic glides under the skis and a mat under the track let the machine drive on and off without damaging the floor, and shields protect the front of the trailer from flying snow and ice. They screw to the floor and are replaced when worn.

07435 pair of tri-fold arched steel ramps, 9 x 72 in., 1,000 lbErickson07435 pair of tri-fold arched steel ramps, 9 x 72 in., 1,000 lb

Boat rollers and bunks

Rollers guide the hull onto the trailer when launching and retrieving; carpeted bunks carry it along its whole length. A split roller or carpet worn down to the wood scratches the hull: they are replaced before the season. Our suppliers stock rollers, carpet and glides for boat trailers.

07459 bi-fold aluminum cargo ramp, 30 x 72 in., 1,200 lbErickson07459 bi-fold aluminum cargo ramp, 30 x 72 in., 1,200 lb

In practice

A hunter who loads an ATV into a pickup replaces old planks with a pair of 7 ft folding aluminum ramps. A snowmobiler redoes the glides and mat on the trailer before winter, and an angler replaces the split rollers on the boat trailer.

25153 straight-tongue coupler, 2 in. ball, Posi-Lock, 2 in. channel, 3,500 lbCurt25153 straight-tongue coupler, 2 in. ball, Posi-Lock, 2 in. channel, 3,500 lb

Good to know

To load an ATV into a pickup, drive slowly and steadily, in a straight line, and never stay seated on a machine that could roll back: many owners prefer to walk beside it with a winch or climb gently in low gear. Both ramps have to be lined up with the wheels before starting.

A spring-assisted trailer ramp lifts without effort; a broken spring makes it heavy and dangerous. Ramp springs are replaced in pairs.

25210 A-frame coupler, 2 in. ball, Posi-Lock, 5,000 lbCurt25210 A-frame coupler, 2 in. ball, Posi-Lock, 5,000 lb

Worth remembering

Ramps are stored strapped down in the bed or on the trailer, never loose: an aluminum ramp sliding forward when braking can break a window or injure someone, and it is a lot of metal to have flying around a cab.

25474 QuickPin no-latch A-frame coupler, 2 5/16 in., 14,000 lbCurt25474 QuickPin no-latch A-frame coupler, 2 5/16 in., 14,000 lb

What we can order

  • Straight, arched and folding aluminum ramps
  • Ramp safety straps
  • Snowmobile glides, mats and shields
  • Boat rollers and brackets
  • Bunk carpet and boards for boat trailers
  • Trailer ramp springs

Care

Always strap the ramps to the tailgate or the trailer with their safety straps before loading: a ramp that slips at the wrong moment drops the machine. Check the tabs and welds of aluminum ramps every season.

Rinse boat rollers and carpet with fresh water after every outing.

05557-95 Demco Slide Lok 2 5/16 in. bolt-on channel coupler, 12,500 lbDemco05557-95 Demco Slide Lok 2 5/16 in. bolt-on channel coupler, 12,500 lb

Ordering at Martin Remorques

Tell us the machine, its weight and the loading height: we find the right ramps or accessories.

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Which ramp length for a pickup?

Often 7 to 8 ft, for a gentle angle from a high tailgate.

Straight or arched ramp?

Arched for low machines, which would scrape at the top of a straight ramp.

Do you sell boat rollers individually?

Yes, with their brackets and shafts.

Do aluminum ramps carry a side-by-side?

The ones rated for its weight, yes; the capacity per pair is marked on the ramps, and a side-by-side usually needs wider, heavier ramps than an ATV.

Do you sell ramp springs?

Yes, and our shop installs them, in pairs, so the ramp lifts evenly and stays where you leave it.

Do the ramps fold for storage?

Folding models, yes, down to about half their length, which lets them ride in the bed beside the machine without taking up the whole floor.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm