Gooseneck hitches
A gooseneck hitch puts a 2 5/16 in. ball in the middle of the pickup bed, over the rear axle. It pulls the heaviest work trailers and leaves the bed almost free when the ball is stowed.

Choose your part
Under the bed
The hitch structure bolts to the frame under the bed, and only the ball comes through the floor. It removes or flips down to leave the bed flat. Two safety chain loops sit on either side of the ball.
As with fifth wheels, many pickups have factory points that take a gooseneck ball with the right kit. Curt makes under-bed gooseneck hitches and kits for those factory points.
Gen-Y HitchGH-14011 Dominator Torsion-Flex gooseneck ballAdapters
An adapter lets you tow a fifth wheel trailer on a gooseneck ball: it fits on the trailer’s king pin and drops onto the ball. Gen-Y Hitch makes cushioned gooseneck couplers and adapters that reduce jolts in the cab.
Before fitting one, check that the trailer and truck manufacturers allow it: some fifth wheel campers do not.
Gen-Y HitchGH-21011 GoosePuck GEN 2 offset gooseneck ballIn practice
An excavator owner pulling a 20,000 lb gooseneck deckover has an under-bed hitch installed on the one ton truck: the rest of the time, the stowed ball leaves room for materials. A cattle farmer pulls the livestock trailer and the deckover with the same ball.
Curt13902 Class 3 multi-fit hitch, 2 in. receiverChoosing well
The hitch rating has to cover the loaded trailer, and the load on the ball, often 15 to 25% of that weight, has to stay within the truck’s rear axle rating and payload.
A ball that flips under the floor always stays with the truck; a removable ball is stored elsewhere, but can get lost. The choice depends on how often you tow and what goes in the bed the rest of the time.
Curt15511 Class 5 multi-fit hitch, 2 in. receiverChains and height
The trailer’s safety chains hook to the loops on each side of the ball, never to the ball or to the truck body. The breakaway cable attaches to a fixed point, separate from the chains.
The gooseneck tongue has to leave clearance between the trailer and the bed rails on slopes; most goosenecks adjust in height. A level trailer, neither too high nor too low, spreads its load evenly over its axles.
Curt12923 Class 2 multi-fit hitch, 1 1/4 in. receiverWhat we can order
- Under-bed gooseneck hitches
- Kits for factory mounting points
- Removable or flip-over 2 5/16 in. balls
- Cushioned gooseneck couplers (Gen-Y Hitch)
- Fifth wheel to gooseneck adapters
- Safety chain loops
Care
Clean the ball socket and grease the ball before hitching. Check the structure bolts once a year.
Plug the socket when the ball is out so sand and ice stay out.
Draw-Tite76670 Class 3 hitch, 2 in. receiver, Jeep Wagoneer SOrdering at Martin Remorques
Tell us your truck, its bed length and the trailer to pull: we choose the hitch and the kit, and install them.
Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.
Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.
You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Manufacturers of this part type
Gen-Y HitchGen-Y Hitch
Maker of hitches, torsion ball mounts, gooseneck and fifth-wheel adapters.
The availability of a part and of each model is confirmed with the team before ordering.
Request a part
Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
Is the gooseneck ball in the way in the bed?
No, it removes or flips down, and the bed stays almost flat.
Can a fifth wheel camper be towed on a gooseneck?
With an adapter, if the camper and truck manufacturers allow it.
What ball size for a gooseneck?
2 5/16 in., with a rating that covers the loaded trailer.
Does the hitch stay under the truck in winter?
Yes, it is bolted to the frame; a coat of protection and a plug in the socket keep it clean, so the ball goes in easily when you need it in spring.
Does the truck bed need drilling?
One hole for the ball, unless the truck has factory points, which are already there; our shop handles the installation and seals everything so water stays out of the frame.
How do I order a part from Martin Remorques?
Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.
Can Martin Remorques install the part?
Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.
Your next project
Let’s talk
A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.













