Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · AXLES AND BRAKES

Trailer springs and suspensions

Leaf springs, equalizers, shackles and their bolts connect the axle to the frame and soak up the road. Over time, they sag, rust and wear; replacing them gives the trailer back its ride height and its handling.

Trailer springs and suspensions

Leaf springs

A double eye spring is bolted at both ends, into a front hanger and a rear shackle. A slipper spring has a curved end that slides on a hanger, simpler and common on heavier trailers. A spring is chosen by its rating, its eye-to-eye length and its number of leaves.

The springs on the same axle are always replaced together, with their U-bolts and plates, so the trailer stays level.

TRA1032 Timbren SES helper springs for RV trailers, 5,000 lbTimbrenTRA1032 Timbren SES helper springs for RV trailers, 5,000 lb

Tandems and their hardware

On a two-axle trailer, the equalizer, between the two springs on each side, shares the load between the axles over bumps. Bolts, bushings and shackles wear with every kilometre; a hardware kit with greaseable bolts, made by Dexter, replaces them in one go and is then greased at every service.

TSS-106-40 Trailer SumoSprings, 1,400 lb, 1.75 in. leavesSuperSprings InternationalTSS-106-40 Trailer SumoSprings, 1,400 lb, 1.75 in. leaves

Helper springs

Timbren makes rubber springs that fit between the axle and the frame and take over when the trailer is loaded, as well as axle-less suspensions. SuperSprings International makes SumoSprings, microcellular foam helper springs that smooth the ride of a loaded trailer or vehicle.

Our suppliers stock Timbren and SumoSprings suspensions, leaf springs and the hardware for common axles.

TSS-107-47 Trailer SumoSprings, 1,800 lb, 1.75 in. leavesSuperSprings InternationalTSS-107-47 Trailer SumoSprings, 1,800 lb, 1.75 in. leaves

In practice

A 12-year-old deckover with flat springs and worn equalizer bolts gets new springs and a greaseable bolt hardware kit: it regains its height and stops squeaking. A camper owner adds helper springs for a trip with a fully loaded trailer.

230281 slipper leaf spring, 1,250 lb, 4 leaves, 1 3/4 x 25 in.Lippert230281 slipper leaf spring, 1,250 lb, 4 leaves, 1 3/4 x 25 in.

Good to know

When the suspension is rebuilt, it is the right time to check the hangers welded to the frame: a cracked hanger or a hole worn oval is repaired before the new springs go in. Our shop welds and replaces hangers when needed, so the new springs sit square.

A trailer with a healthy suspension wears its tires less, shakes its load less and tracks straighter behind the vehicle, which also makes long trips less tiring for the driver.

2024114953 Equa-Flex rubberized equalizer tandem kit, 4,000 to 6,000 lbLippert2024114953 Equa-Flex rubberized equalizer tandem kit, 4,000 to 6,000 lb

Worth remembering

Helper springs do not change the axle rating: they smooth the ride and reduce sag, but the load is still limited by the trailer’s label and by its tires, whatever the springs can hold.

ASR2000S01 Timbren axle-less trailer suspension, 2,000 lbTimbrenASR2000S01 Timbren axle-less trailer suspension, 2,000 lb

What we can order

  • Double eye and slipper leaf springs
  • Equalizers and shackles
  • Greaseable bolt hardware kits (Dexter)
  • U-bolts, plates and bushings
  • Helper springs and axle-less suspensions (Timbren)
  • SumoSprings (SuperSprings International)

Care

Grease the greaseable bolts at every service and check U-bolt torque once a year. A cracked spring, a broken leaf or bushings worn to bare metal are replaced without waiting.

A trailer that leans to one side often has a sagging or broken spring.

ASR3500S05 Timbren axle-less trailer suspension, 3,500 lb, brake flangeTimbrenASR3500S05 Timbren axle-less trailer suspension, 3,500 lb, brake flange

Ordering at Martin Remorques

Bring the axle rating, the spring’s eye-to-eye length and its type, or bring the trailer in: we order the parts and install them.

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers of this part type

Dexter

Timbren

Timbren

Maker of rubber helper springs and axle-less trailer suspensions.

TRA1032 Timbren SES helper springs for RV trailers, 5,000 lbASR2000S01 Timbren axle-less trailer suspension, 2,000 lbASR3500S05 Timbren axle-less trailer suspension, 3,500 lb, brake flange

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
How can I tell my springs are worn out?

The trailer sits lower or leans, the springs are flat or a leaf is cracked.

Should both springs on an axle be replaced?

Yes, always together, to keep the trailer level.

Are greaseable bolts worth it?

Yes, they last much longer and reduce squeaking.

How long do springs last?

Years, depending on the load and the roads; salt and overloading wear them faster, so a trailer that works hard every day or sits outside all winter will need springs sooner than one kept for weekend use.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm