Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · AXLES AND BRAKES

2,000 to 7,000 lb trailer axles

The axle carries the trailer and its load. When it is bent, worn or too weak for the job, it is replaced with a complete axle of the right rating and measurements, with or without brakes. Martin Remorques orders the axle and our shop installs it.

2,000 to 7,000 lb trailer axles

Rating and bolt pattern

Axles are classed by rating: 2,000 or 2,500 lb for small trailers, 3,500 lb for most utility and boat trailers, 5,200 and 6,000 lb for equipment trailers and campers, 7,000 lb and more for deckovers and dump trailers. A trailer’s capacity is the sum of its axles, within the limits of its tires and frame.

The wheel bolt pattern often follows the rating: 5 on 4 1/2 in. for a 3,500 lb axle, 6 on 5 1/2 in. for 5,200 and 6,000 lb, 8 on 6 1/2 in. for 7,000 lb. Keeping the same bolt pattern lets you keep your wheels.

ASR2000S01 Timbren axle-less trailer suspension, 2,000 lbTimbrenASR2000S01 Timbren axle-less trailer suspension, 2,000 lb

The measurements that matter

To order the right axle, you need the hub face to hub face distance, which keeps the wheels in the same place under the fenders, and the spring center distance, which has to line up with the trailer’s hangers. Also note whether the axle is straight or drop, and the spring type.

A drop axle, bent downward, lowers the trailer by about 3 to 4 in. to make loading a machine or an ATV easier; it needs enough ground clearance under the trailer.

ASR3500S05 Timbren axle-less trailer suspension, 3,500 lb, brake flangeTimbrenASR3500S05 Timbren axle-less trailer suspension, 3,500 lb, brake flange

Springs or torsion

A leaf spring axle is simple, tough and easy to repair part by part. A torsion axle, such as Dexter’s Torflex, hides its suspension in the tube: rubber cords cushion each wheel separately, for a smoother ride and less maintenance. It is replaced as a whole when the rubber wears out.

Timbren also makes axle-less suspensions, where each wheel has its own rubber spring, for trailers that travel over rough ground.

ASR5200S01 Timbren axle-less trailer suspension, 5,200 lb, brake flangeTimbrenASR5200S01 Timbren axle-less trailer suspension, 5,200 lb, brake flange

In practice

A utility trailer whose axle bent in a pothole gets a 3,500 lb axle with the same measurements, with new hubs. An owner who wants to haul heavier replaces two 3,500 lb axles with 5,200 lb axles, after checking that the frame and the tires can keep up.

ASR7KHDS04 Timbren HD axle-less trailer suspension, 7,000 lb, 4 in. liftTimbrenASR7KHDS04 Timbren HD axle-less trailer suspension, 7,000 lb, 4 in. lift

Common ratings

  • 2 000 et 2 500 lbSmall utility and recreational trailers
  • 3 500 lbUtility and boat trailers, small campers; often 5 on 4 1/2 in.
  • 5 200 et 6 000 lbEquipment trailers, campers; often 6 on 5 1/2 in.
  • 7 000 lb et plusDeckovers, dump trailers, heavy trailers; often 8 on 6 1/2 in.

What we can order

  • Complete 2,000 to 7,000 lb axles
  • Straight and drop axles
  • Leaf spring and torsion axles
  • Braked and idler axles
  • Axle tubes and spindles
  • Axle-less suspensions (Timbren)

Care

Have the wheel alignment checked if a tire wears on one side, and inspect the axle after any hard hit. A bent axle cannot be straightened reliably: it gets replaced.

Never exceed the rating on the axle and trailer labels.

94545PR pair of 10 in. electric brake hubs, 3,500 lb, 5 on 4.5 in.Timbren94545PR pair of 10 in. electric brake hubs, 3,500 lb, 5 on 4.5 in.

Ordering at Martin Remorques

Bring the hub face to hub face and spring center measurements, the rating and the bolt pattern, or bring the trailer in: we order the axle and install it.

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers of this part type

Dexter

Timbren

Timbren

Maker of rubber helper springs and axle-less trailer suspensions.

ASR2000S01 Timbren axle-less trailer suspension, 2,000 lbASR3500S05 Timbren axle-less trailer suspension, 3,500 lb, brake flangeASR5200S01 Timbren axle-less trailer suspension, 5,200 lb, brake flange

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Which measurements are needed for an axle?

Hub face to hub face, spring centers, rating, bolt pattern, and straight or drop.

Can my trailer’s capacity be raised?

Stronger axles help, but the frame, tires and wheels have to keep up; we check the whole trailer.

Can a torsion axle be repaired?

Its hubs and brakes, yes; when the rubber is worn, the whole axle is replaced.

How long does an axle replacement take?

Often a few hours once the axle has arrived, a little more when the springs and hardware are replaced at the same time; we give you the timing with the quote.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm