For a trailer, Wanda Tyre trailer tires (lines TR078 and WR078) are chosen by the size and load range on the tire in place or on the trailer label. One tire’s capacity, times the number of tires, must exceed the weight of the loaded trailer.
Read more
The tires on one axle are replaced together, in the same size and load range, and the spare follows the same rule. A trailer tire is inflated cold, to the pressure on the trailer label or, failing that, to the maximum pressure on its sidewall.
A radial tire runs cooler and wears more slowly on the highway; a bias tire has stiffer sidewalls, at ease under a heavy load at low speed. The two are never mixed on one axle. A balanced trailer wheel vibrates less and wears its tread more evenly, especially on long trips.
A trailer tire often ages before it wears out: its manufacturing date is in the last four digits of the DOT code, the week and then the year. A trailer that stays outdoors keeps its tires better out of the sun. The speed rating is on the sidewall too: many ST tires are rated for 65 mph.
A trailer tire can also be ordered mounted on a new wheel, balanced and ready to install: it then takes the number of studs, the bolt pattern and the offset of the wheel in place. The tongue weight, about 10 to 15% of the loaded trailer’s weight, does not rest on its tires; the rest is shared by the tires on the axles.
After a wheel is installed, the nut torque is checked again after the first few kilometres. A trailer stored for the winter keeps its tires better if it rests on stands or is moved a little from time to time, which prevents flat spots.
Before a long trip, cold pressure, tread wear, sidewall cracks and wheel nut torque are checked on every wheel, spare included. A tire whose tread reaches the wear bars, whose sidewall is cracking or that kept a bulge after an impact gets replaced.

