Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · COUPLERS AND JACKS

Trailer jacks, feet and stabilizers

The jack lifts the tongue to hitch and unhitch, and holds up the parked trailer. Stabilizer legs, at the back or the corners, stop it from tipping or moving during loading. A good jack makes hitching easy and safe.

Trailer jacks, feet and stabilizers

Jack types

A swivel side-wind jack bolts to the tongue and folds horizontal for the road: it is the most common on utility and boat trailers. An A-frame top-wind jack mounts on the tongue of campers and enclosed trailers. A drop-leg jack drops quickly to the ground with a pin, then fine-tunes with the crank: it serves heavy trailers.

An electric jack lifts the tongue at the push of a button, handy on a big trailer or for someone who hitches often. Curt and Buyers Products make jacks in all these styles, from a few hundred to several thousand pounds.

25006 pipe-mount swivel jack, top handle, 5,000 lbCurt25006 pipe-mount swivel jack, top handle, 5,000 lb

Rating and foot

The jack rating has to exceed the loaded trailer’s tongue weight, often 10 to 15% of its total weight: a 7,000 lb trailer needs at least a 1,000 lb jack, and more for comfort. The foot is chosen for the ground: a caster to move the trailer by hand on asphalt, a wide pad for dirt and gravel.

25005 pipe-mount swivel jack, side handle, 15 in. travelCurt25005 pipe-mount swivel jack, side handle, 15 in. travel

Stabilizers

An unhitched enclosed trailer or camper tips backward when you walk in over the ramp. Stabilizer legs at the back, crank or drop-down, keep it level. On a deckover or a dump trailer, rear legs support the trailer while a machine drives on. They stabilize, but are not meant to lift the trailer.

25004 marine trailer jack with 6 in. wheel, 1,000 lbCurt25004 marine trailer jack with 6 in. wheel, 1,000 lb

In practice

A boat trailer owner replaces a seized jack with a swivel jack on a caster, to roll the trailer into the garage by hand. A contractor fits a drop-leg jack on the equipment trailer and two stabilizer legs at the back of the enclosed trailer.

813748 Lippert Power Stance electric tongue jack, 3,500 lbLippert813748 Lippert Power Stance electric tongue jack, 3,500 lb

Good to know

A jack is mounted far enough forward to lift the coupler above the ball, and high enough not to touch the ground once folded for the road. On an A-frame tongue, it must not get in the way of the propane tanks or the toolbox. Our shop chooses the location and model for your trailer.

25153 straight-tongue coupler, 2 in. ball, Posi-Lock, 2 in. channel, 3,500 lbCurt25153 straight-tongue coupler, 2 in. ball, Posi-Lock, 2 in. channel, 3,500 lb

Worth remembering

A jack folded horizontal for the road keeps its foot clear of the ground and the bumps; a jack left down bends at the first speed bump, which is why many owners make folding it part of their pre-departure check.

25210 A-frame coupler, 2 in. ball, Posi-Lock, 5,000 lbCurt25210 A-frame coupler, 2 in. ball, Posi-Lock, 5,000 lb

What we can order

  • Swivel side-wind jacks
  • A-frame top-wind jacks
  • Drop-leg jacks
  • Electric jacks
  • Jack casters, pads and feet
  • Stabilizer legs and jack stands

Care

Grease the jack’s gears and screw every season and retract it before driving. A jack that binds, creeps down on its own or has a bent tube gets replaced.

Never let anyone get under a tongue held up by the jack alone.

25474 QuickPin no-latch A-frame coupler, 2 5/16 in., 14,000 lbCurt25474 QuickPin no-latch A-frame coupler, 2 5/16 in., 14,000 lb

Ordering at Martin Remorques

Tell us the trailer’s weight, its tongue and the ground it is parked on: we choose the jack and install it.

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers of this part type

Curt

Curt

Maker of hitches, ball mounts, wiring harnesses and brake controllers.

25006 pipe-mount swivel jack, top handle, 5,000 lb25005 pipe-mount swivel jack, side handle, 15 in. travel25004 marine trailer jack with 6 in. wheel, 1,000 lb

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Which jack rating should I choose?

More than the loaded trailer’s tongue weight, often 10 to 15% of its total weight.

Is an electric jack worth it?

On a big trailer or for someone who hitches often, yes.

Do stabilizers lift the trailer?

No, they keep it steady; the jack does the lifting.

Does an electric jack work unhitched?

Yes, on the trailer’s battery, which is why that battery has to stay charged between trips, by the 7-way, a charger or a small solar panel.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm