Marker lights, reflectors and reflective tape
Marker lights and reflectors outline the trailer in the dark: its width, its length and its corners. They help other drivers see where it starts and ends, especially at night and in bad weather.

Choose your part
Colours and positions
Amber lights and reflectors go at the front and on the sides toward the front of the trailer; red ones at the back and on the sides toward the back. On a long trailer, more amber side lights go in the middle. Wide trailers, 80 in. and more, also carry clearance lights at the corners and a bar of three identification lights at the back.
Grote and Uni-Bond make LED marker lights, round, rectangular or fender mounted, and reflectors in every size.
Grote47172 Grote SuperNova 3 in. thin-line LED clearance marker, redReflective tape
Red and white reflective tape, laid along the sides and the back of a heavy trailer or a deckover, makes it visible from far away in headlights, even unlit on the roadside. It goes on a clean, dry surface and lasts for years.
On a deckover with no sides, tape on the rub rail and reflectors at the corners outline the trailer well, which would otherwise be almost invisible from the side at night.
Grote46423-5 Grote 3 in. amber clearance marker kitInstalling them right
Marker lights connect to the trailer’s running light circuit, through sealed connectors, with a good ground. On an exposed fender or rail, a recessed or guarded light stands up better to branches and knocks. Our shop installs the lights, reflectors and tape, and checks the circuit.
Uni-BondLED2000-1A 2 in. round LED marker light, amberIn practice
A contractor who drives home from the site after dark has LED marker lights fitted on the deckover’s fenders and reflective tape on its rail. The owner of an 8.5 ft enclosed trailer replaces burned-out clearance lights with LEDs.
Uni-BondRF3001R 3 in. round stick-on reflector, redGood to know
The trailer’s marker lights come on with the vehicle’s headlights, on the same wire as the tail lights. A trailer well lit on the sides is also seen at intersections and driveways, when another driver approaches from the side and only sees its flank in the dark.
Uni-BondLTL4141K-S LED submersible trailer light kit, under 80 in.Worth remembering
A marker light recessed into the fender or protected by a guard survives branches and the odd knock from a shovel or a loader bucket, which makes it a good choice on a work trailer.
Uni-BondLTL5451 LED submersible tail light, under 80 in.What we can order
- Amber and red LED marker lights
- Clearance lights and identification bars
- Fender mount lights
- Reflectors in every size
- Red and white reflective tape
- Sealed connectors and wiring
Care
Clean reflectors and tape: mud and salt make them almost invisible. Replace a cracked reflector or a light that no longer comes on.
Check the marker lights along with the tail lights, before every trip.
Uni-BondAXL4000-10R 4.75 in. round LED stop/turn/tail light, rubber housingOrdering at Martin Remorques
Tell us your trailer, its width and what is missing: we supply the lights, reflectors and tape, and install them.
Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.
Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.
You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Request a part
Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
Which colour on the sides?
Amber toward the front, red toward the back.
Is reflective tape useful?
Yes, it makes a trailer visible in headlights, even parked with no lights on.
Does my trailer need clearance lights?
Wide trailers, 80 in. and more, carry them; we check yours.
Are reflectors enough without lights?
They complement the lights; a trailer runs with its lights on at night, and reflectors keep it visible if a light fails or when it is parked on the roadside.
How many reflectors on a trailer?
At least at the back and on each side, and more along the sides of a long trailer; we check what yours has and add what is missing to make it clearly visible.
How do I order a part from Martin Remorques?
Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.
Can Martin Remorques install the part?
Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.
Your next project
Let’s talk
A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.






