Buyers ProductsBuyers Products
Work truck equipment: toolboxes, warning lights, hitches and snowplow parts.
Hooks and shackles connect chains, cables and straps to what they hold: the trailer to the vehicle, the machine to the deck, the winch to the stuck vehicle. A part costing a few dollars that carries the whole load, and that has to be chosen at the right rating.

Chain hooks finish a tie-down or safety chain: a grab hook that locks a link, a slip hook that lets the chain slide, a latch hook that does not come off over a bump. Shackles join two parts together, in steel or synthetic fibre. Winch hooks finish the winch cable or rope.
Buyers Products and Curt make hooks and shackles for tie-downs and trailer safety chains, Warn shackles and hooks for recovery, and Monster Hooks tow and recovery hooks that mount in the hitch receiver.
Curt81270 certified S-hook, 7/16 in., 5,000 lbEvery hook and shackle has a working load limit, stamped or marked on the part. It is the load they can carry in normal use, well below their breaking strength. A chain is never stronger than its weakest hook.
The chain grade and the hook grade have to match: a grade 70 hook on a grade 70 chain, for example. An unmarked hook or a piece of decorative hardware has no place on a tie-down chain.
Warn92093 Warn Epic shackle, 3/4 in.A contractor tying a mini excavator to a deckover uses four grade 70 chains with grab hooks and binders, one at each corner. A side-by-side owner keeps a soft shackle, a tree saver strap and a spare winch hook in the recovery kit.
Warn92089 Warn Epic winch hook, winches up to 5,000 lbFor tying a machine down on a trailer, grade 70 grab or clevis hooks, matched to grade 70 chain and binders of the same rating, are the standard. For a trailer’s safety chains, latch hooks are used, rated at least for the weight of the loaded trailer.
For recovering a stuck vehicle, bow or soft shackles, recovery straps and winch hooks rated at least as high as the winch are used. Mixing these uses, such as a tie-down hook on a recovery strap, puts everyone nearby in danger.
Curt81820 safety latch S-hook, 7/16 in., 5,000 lbQuality hooks and shackles are made of forged, heat-treated alloy steel, which bends before it breaks and so shows an overload. A cast or soft metal part can snap without warning. The manufacturer’s mark, the grade and the load limit stamped on the part are the sign of a part made to carry a load.
Warn88999 Warn clevis D-shackle, 3/4 in., galvanizedMartin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.
Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.
You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Buyers ProductsWork truck equipment: toolboxes, warning lights, hitches and snowplow parts.
Monster HooksMaker of receiver-mounted tow and recovery hooks.
The availability of a part and of each model is confirmed with the team before ordering.
Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
On the part itself: working load limit and grade, stamped or engraved.
No: the whole assembly takes the rating of its weakest part.
Yes, we cut chain and fit hooks for your use; see our custom chain page.
Tie-down holds a load that should not move; recovery pulls a vehicle with sharp jolts and sudden peaks of force, and it needs hooks, shackles and straps made and rated for that kind of work, not tie-down hardware.
Yes, with shackles, a tree saver strap, a snatch block, a line damper and gloves, packed in a bag that rides in the truck or on the side-by-side all season long.
Replace it, even if it looks fine: steel that has been pushed past its limit can be weakened inside, and the next pull is not the time to find out.
Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.
Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.
A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.