Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · HOOKS AND SHACKLES

Chain hooks and safety latch hooks

The hook finishes the chain and connects it to what it holds. Depending on its shape, it locks a link, lets the chain slide or closes with a latch. The right hook, at the right grade, makes all the difference between a well secured load and a chain that comes loose.

Chain hooks and safety latch hooks

Grab, slip or latch

A grab hook has a narrow throat that takes a link sideways and locks it: it is used to shorten a chain or fix it at the right length on a deck. A slip hook has an open throat that lets the chain slide: it tightens around a load, like a choker.

A latch hook has a spring that closes its throat: it does not come off by itself over a bump or when the chain slackens. It is the hook used on trailer safety chains, hooked to the loops of the vehicle’s hitch.

81270 certified S-hook, 7/16 in., 5,000 lbCurt81270 certified S-hook, 7/16 in., 5,000 lb

Eye or clevis

An eye hook connects to the chain with a coupling link; a clevis hook bolts straight to the last link with a pin and a cotter. Both carry the same load at the same grade; the clevis is more compact and fits without special tools.

Buyers Products and Curt make grade 70 hooks for tie-downs and latch hooks for safety chains, in the common chain sizes from 1/4 to 1/2 in.

81820 safety latch S-hook, 7/16 in., 5,000 lbCurt81820 safety latch S-hook, 7/16 in., 5,000 lb

S-hooks

The S-hook, still common on small trailers, is simple but can come off and opens under heavy load. On a heavier or newer trailer, it is replaced by a latch hook of the right rating, often for a few dollars, which makes the safety chains truly useful.

81438 clevis grab hook, 3/8 in., grade 70, 6,600 lbCurt81438 clevis grab hook, 3/8 in., grade 70, 6,600 lb

In practice

A utility trailer owner replaces the S-hooks on the safety chains with latch hooks. An equipment hauler keeps chains with grab hooks at both ends to set the length to the link, and a slip hook to cinch a load of posts.

81550 safety latch clevis hook, 5/16 in., 14,000 lbCurt81550 safety latch clevis hook, 5/16 in., 14,000 lb

Good to know

On a safety chain, the hook should not touch the ground: a chain that drags wears out and catches on things. The chains cross under the tongue to form a cradle that would catch the coupler if it came loose, keeping it off the pavement while you pull over.

81900 safety latch clevis hook, 1/4 in., 7,800 lbCurt81900 safety latch clevis hook, 1/4 in., 7,800 lb

What we can order

  • Grade 70 grab hooks
  • Slip hooks
  • Safety latch hooks for safety chains
  • Eye and clevis hooks
  • Coupling links
  • Hooks from 1/4 to 1/2 in.

Care

Inspect hooks before each use: an opened throat, a crack, wear or a latch that no longer closes means it gets replaced. A bent hook is never straightened.

Rinse off salt and store chains dry, never sitting in water at the bottom of the toolbox.

92093 Warn Epic shackle, 3/4 in.Warn92093 Warn Epic shackle, 3/4 in.

Ordering at Martin Remorques

Tell us your chain size and grade and the use: we find the right hooks and can fit them.

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers of this part type

Curt

Curt

Maker of hitches, ball mounts, wiring harnesses and brake controllers.

81270 certified S-hook, 7/16 in., 5,000 lb81820 safety latch S-hook, 7/16 in., 5,000 lb81438 clevis grab hook, 3/8 in., grade 70, 6,600 lb

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Which hook for trailer safety chains?

A latch hook rated equal to or above the chain.

Grab or slip hook?

Grab to set a length, slip to cinch around a load.

Is an opened hook dangerous?

Yes: an opened throat shows the hook was overloaded, and it must be replaced.

Are hooks sold on their own?

Yes, and we can also fit them to your existing chain if it is in good condition and of the right grade, with coupling links or clevis pins rated to match.

How many hooks to tie down a machine?

At least four tie-down points, one at each corner, each with its own chain and hook; heavier machines and attachments such as buckets or breakers get their own chain as well.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm