Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · TIE-DOWNS AND STRAPS

E-track rails and accessories

E-track rails turn the walls and floor of an enclosed trailer into anchor points: slots every 2 in. take straps, rings, cargo bars and holders, wherever the load needs them.

E-track rails and accessories

How it works

The steel rail, horizontal or vertical, bolts to the wall or the floor, preferably into the trailer’s structure. Its slots take a spring fitting that locks with a click; you remove it by pressing the spring. The same rail serves an ATV one day and boxes of materials the next.

L-track, flatter and lower profile, goes into vans and small trailers; its fittings are not the same as E-track fittings.

7843909 horizontal E-track, galvanized, 10 ftFaucher7843909 horizontal E-track, galvanized, 10 ft

The accessories

Straps with E-track fittings hook straight to the rail, with no hook needed. Removable rope rings and D-rings move from slot to slot. E-track shoring beams span the trailer wall to wall to block a load, and holders for shovels, ladders or cords organize tools.

Erickson makes straps, cargo bars and cargo management accessories, including parts for E-track rails.

7846025 vertical E-track, galvanized, 10 ftFaucher7846025 vertical E-track, galvanized, 10 ft

Where to put the rails

For an ATV or a snowmobile, rails on the floor or low on the walls hold the machine at all four corners. For boxes and materials, two horizontal rows on each wall, at waist and shoulder height, take the shoring beams. Our shop mounts the rails into the structure, not just into the wall panel.

7840633 A-series slotted rail, galvanized, 10 ftFaucher7840633 A-series slotted rail, galvanized, 10 ft

In practice

An electrician has two rows of E-track installed in an Ideal Cargo trailer: spools, ladders and boxes stay put, and the space is rearranged in minutes for each job. A snowmobiler has floor rails installed to tie down two sleds.

7846258 multi-purpose rail with tie anchors, galvanized, 10 ftFaucher7846258 multi-purpose rail with tie anchors, galvanized, 10 ft

Good to know

The rail holds only as much as its screws do: in an enclosed trailer, it is fastened into the uprights and crossmembers, with bolts or screws suited to the structure. Screwed only into the interior panel, it tears the panel out at the first heavy load.

In an Ideal Cargo trailer with EvoCore panels, the manufacturer provides fastening guidelines: our shop follows them when installing the rails. Once in place, the rails let you reorganize the trailer in minutes, as often as the work changes.

7846000 rail with 1 in. round holes, galvanized, 10 ftFaucher7846000 rail with 1 in. round holes, galvanized, 10 ft

Worth remembering

A well organized trailer also unloads faster: every tool has its place, and you can tell at a glance whether anything is missing before leaving the job site, which saves trips back to fetch a forgotten tool.

78632 ratchet strap, 2 in. x 22 ft, 10,000 lb, wear sleeveErickson78632 ratchet strap, 2 in. x 22 ft, 10,000 lb, wear sleeve

What we can order

  • Horizontal and vertical E-track
  • L-track rails
  • E-track straps
  • Removable rope rings and D-rings
  • E-track shoring beams
  • Tool, ladder and cord holders

Care

Keep the slots clean and the fittings lubricated so they lock properly. Check the rail screws or bolts once a year.

Replace a fitting whose spring no longer returns: it can release under load.

01440 retractable ratchet strap, 1.5 in. x 16 ft, 5,000 lbErickson01440 retractable ratchet strap, 1.5 in. x 16 ft, 5,000 lb

Ordering at Martin Remorques

Tell us your trailer and what you carry in it: we suggest a rail layout, supply the rails and install them.

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers of this part type

Erickson

Erickson

Maker of ratchet tie-down straps, cargo bars and cargo management accessories.

78632 ratchet strap, 2 in. x 22 ft, 10,000 lb, wear sleeve01440 retractable ratchet strap, 1.5 in. x 16 ft, 5,000 lb01432 The Winder ratchet strap, 1 in. x 15 ft, 1,200 lb

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Do E-track fittings fit L-track?

No, each rail has its own fittings.

Can E-track go into an existing enclosed trailer?

Yes, our shop fastens it into the wall and floor structure.

How many rows of rails?

Often two per wall for materials, and floor rails for machines.

Can E-track go on the floor?

Yes, recessed or surface mounted, to tie down machines; recessed floor track keeps the floor flat for rolling carts and pallets in and out.

Does E-track add much weight?

Very little: a few pounds per 10 ft rail, which is nothing compared to the time it saves and the damage it prevents when the load stays exactly where you put it.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm