Ball mounts and drop hitches
A ball mount slides into the receiver and carries the ball. Its rise or drop puts the trailer level behind the vehicle, which makes all the difference to handling and tire wear.

Choose your part
A level trailer
A trailer that dips its nose overloads the front axle and lightens the vehicle; a trailer that lifts its front overloads the rear axle and sways more. The right ball mount brings the tongue level, with the trailer loaded.
To work out the drop, measure from the ground to the top of the receiver opening, then from the ground to the bottom of the coupler, with the trailer level. The difference gives the drop or rise to choose.
Gen-Y HitchGH-313 Mega-Duty 10K adjustable drop hitchFixed or adjustable
A fixed ball mount, in one piece, is simple and strong, for a trailer always towed by the same vehicle. An adjustable mount moves the ball up and down in steps and serves several trailers; some carry two or three balls of different sizes.
Gen-Y Hitch makes heavy-duty adjustable mounts for trucks and heavy trailers, with a cushion that softens the shocks. Curt and Draw-Tite offer fixed and adjustable mounts for every receiver, and Stealth Hitches short and long mounts for its hidden hitches.
Gen-Y HitchGH-513 Mega-Duty 16K adjustable ball mountThe right shank
The shank has to match the receiver: 1 1/4, 2, 2 1/2 or 3 in. Its length matters too: a longer shank moves the ball back to clear a spare tire or a bike rack, but lowers the allowed capacity.
Curt45810 multi-use ball mount with extra receiverIn practice
A lifted pickup pulling a low utility trailer needs a drop of 6 in. or more. An owner who tows a boat trailer one day and a utility trailer the next takes an adjustable mount with two balls: changing trailers no longer means changing mounts.
Curt13902 Class 3 multi-fit hitch, 2 in. receiverCapacity and clearance
The ball mount’s rating is marked on it: gross trailer weight and tongue weight. It has to equal or exceed the loaded trailer, without ever going past the rating of the hitch and the vehicle.
A mount with a big drop brings the ball close to the ground: check the clearance in steep driveways and on boat launches. An adjustable mount goes up a notch for those spots, then comes back down to level for the road.
Most fixed mounts can be flipped: a drop mount becomes a rise mount, which helps when you change trailers, unless the manufacturer says otherwise.
Curt15511 Class 5 multi-fit hitch, 2 in. receiverShank sizes
- 1 1/4 poClass I and II receivers
- 2 poClass III and IV receivers, the most common
- 2 1/2 poClass V receivers on heavy trucks
- 3 poHeavy commercial receivers
What we can order
- Fixed rise or drop ball mounts
- Adjustable ball mounts
- Dual and tri-ball mounts
- Cushioned mounts for trucks (Gen-Y Hitch)
- Mounts for 1 1/4, 2, 2 1/2 and 3 in. receivers
- Mounts for hidden hitches (Stealth Hitches)
Care
Remove the ball mount when you are not towing: it does not rust in the receiver and does not hit anyone’s knees. Lightly grease the shank before putting it back.
Check the ball nut torque at the start of each season.
Curt12923 Class 2 multi-fit hitch, 1 1/4 in. receiverOrdering at Martin Remorques
Bring your two measurements, ground to receiver and ground to coupler: we find the mount that levels your trailer.
Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.
Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.
You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Manufacturers of this part type
The availability of a part and of each model is confirmed with the team before ordering.
Request a part
Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
How do I know which drop to choose?
Measure from the ground to the top of the receiver, then from the ground to the bottom of the coupler; the difference is the drop.
Is an adjustable mount as strong?
Yes, if its rating suits the trailer; it is marked on the mount.
Can the mount stay in the receiver?
Better to remove it, or lock it with a keyed pin.
Does an adjustable mount rattle?
A little play is normal; an anti-rattle tightener in the receiver removes most of the noise, and a well fitted pin keeps the shank from moving on rough roads.
How do I order a part from Martin Remorques?
Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.
Can Martin Remorques install the part?
Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.
Your next project
Let’s talk
A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.



















