Trailer bearings, hubs and seals
Bearings let the wheel turn on the axle spindle, protected by grease and a seal. Well kept, they last for years; neglected, they overheat, seize and can make a wheel come off on the highway.

Choose your part
What is inside a hub
Each hub has an inner and an outer tapered roller bearing, each in its race, with a seal at the back that keeps grease in and water out, a castle nut held by a cotter pin and a dust cap that closes it all. Bearing kits come with these parts for your axle size.
Our suppliers stock bearing kits, seals, grease, dust caps and complete hubs for the common axles, from 2,000 to 7,000 lb.
Timbren84545-2 pair of idler hubs, 3,500 lb, 5 on 4.5 in.Dexter systems
Dexter’s E-Z Lube spindle has a grease fitting at the end: you add grease with a gun, without taking the hub apart, and it flows through the bearings from the inside. It is handy between full services, but does not replace an inspection.
Dexter’s Nev-R-Lube system uses sealed bearings, lubricated for life, that need no repacking. They suit trailers that travel a lot or go in the water.
Timbren82655-2 pair of idler hubs, 6,000 lb, 6 on 5.5 in.Boat trailers
A hot hub plunged into cold water draws water in through its seal as it cools. Let the hubs cool for a few minutes before launching, use marine grease, and have the bearings inspected more often than on an ordinary trailer.
Lippert2024055279 threaded hub dust cap, 2 7/8 in., 8,000 lb, greaseIn practice
A camper owner has the bearings repacked and the seals replaced every spring, before the first trip. A job site trailer whose hub was smoking on the roadside gets a complete new hub, with bearings, races, seal and studs, and its other hubs are inspected the same day.
Lippert2023134012 rubber inserts for hub dust caps, 2,000 to 8,000 lb axlesGood to know
The spindle nut setting is precise: too tight, the bearing runs hot; too loose, the wheel has play and the seal leaks. After seating the bearing, the nut is backed off and lightly snugged by hand, then pinned. It is a simple job, but one that does not forgive guesswork.
Carrying a spare bearing kit and seal in the trailer, with the tools to fit them, can save a trip far from home, especially on long drives to a campground or a hunting camp.
TimbrenASR2000S01 Timbren axle-less trailer suspension, 2,000 lbWhat we can order
- Complete bearing kits
- Races, seals and cotter pins
- Bearing grease and marine grease
- Dust caps and grease caps
- Complete hubs
- E-Z Lube spindles and Nev-R-Lube bearings (Dexter)
Care
Touch the hubs at every stop on a long trip: they should be warm, not hot, and all about the same temperature. A hub hotter than the others signals a bearing or a brake working too hard.
Have the bearings inspected and repacked once a year, or at the mileage Dexter recommends.
TimbrenASR3500S05 Timbren axle-less trailer suspension, 3,500 lb, brake flangeOrdering at Martin Remorques
Tell us the axle rating, or bring the old bearing or seal: we find the matching kit, and our shop does the service.
Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.
Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.
You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Manufacturers of this part type
The availability of a part and of each model is confirmed with the team before ordering.
Request a part
Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
How can I tell a bearing is worn?
A very hot hub, a grinding noise or play when you rock the wheel are signs to have it checked.
What is the E-Z Lube system?
A Dexter spindle that lets you add grease through a fitting, without taking the hub apart.
Should the seal be replaced at each service?
Yes, a removed seal is not reused: a new one goes in at every teardown.
Can you install Nev-R-Lube bearings?
Yes, on compatible Dexter axles, with the matching drums; they suit trailers that travel a lot or go in the water, since they never need repacking.
Which grease should I use?
A wheel bearing grease, and a marine grade for a boat trailer; mixing different greases can break them down, so stick with one type once the hubs are packed.
How do I order a part from Martin Remorques?
Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.
Can Martin Remorques install the part?
Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.
Your next project
Let’s talk
A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.



