Trailer axles, brakes and bearings
Under every trailer, the axle, its brakes, its bearings and its suspension carry the whole load. Martin Remorques orders these parts, Dexter parts included, from its suppliers, and our shop replaces, adjusts and services them, from the small utility trailer to the deckover with 15,000 lb per axle.

Choose your part
Four groups of parts
The complete axle, straight or drop, on springs or torsion, is chosen by its rating, from 2,000 to 7,000 lb and more. The brakes, electric or hydraulic, drum or disc, stop the trailer with the vehicle. Bearings, hubs and seals let the wheel turn. Springs, equalizers and hardware connect the axle to the frame.
Our suppliers’ catalogue covers 2,000 to 7,000 lb axles and their components, brake and hub kits, bearing kits, seals, grease and hub caps, leaf springs and hardware, axle tubes, and Timbren and SumoSprings suspensions.
TimbrenASR2000S01 Timbren axle-less trailer suspension, 2,000 lbSigns to watch for
A hub that is very hot to the touch after driving, a squeal, a wheel with play when you rock it: the bearings need attention. A trailer that pulls to one side when braking, brakes that no longer respond to the controller or that lock up: the brakes or their magnets are worn. A tire worn on one side only: the axle may be bent or out of alignment.
Sagging springs, a trailer that leans or equalizer bolts worn to bare metal announce a suspension that needs rebuilding before it gives way under load.
Timbren94545PR pair of 10 in. electric brake hubs, 3,500 lb, 5 on 4.5 in.The yearly service
Once a year, or more often for a trailer that travels a lot, our shop takes the hubs apart, cleans and inspects the bearings, repacks or replaces them with their seals, checks the brakes, their magnets and the adjustment, and inspects springs, equalizers and bolts. The trailer leaves with a list of what was done and what will be needed next.
Timbren84545-2 pair of idler hubs, 3,500 lb, 5 on 4.5 in.In practice
A boat trailer owner has the hub seals and grease replaced every spring, after a summer of launches. A contractor has the brakes and springs of a 10-year-old deckover redone in a single visit, with Dexter parts, and the trailer rides like new.
TimbrenTRA1032 Timbren SES helper springs for RV trailers, 5,000 lbOriginal or equivalent parts
Most trailers sold in Quebec ride on Dexter axles or on axles built to standard measurements. A tag or a plate on the axle tube often gives its maker, rating and date; with it, the exact part is found in minutes. Without a tag, our measurements and the old bearing or seal are enough most of the time.
On a new trailer sold here, such as an N&N, a Laroche or a Weberlane, we already know the axles and brakes, which speeds up service and parts orders for the life of the trailer.
TimbrenASR3500S05 Timbren axle-less trailer suspension, 3,500 lb, brake flangeOrdering at Martin Remorques
Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.
Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.
You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Manufacturers in this family
SuperSprings InternationalSuperSprings International
Maker of helper springs and suspension stabilizers (SumoSprings, SuperSprings).
The availability of a part and of each model is confirmed with the team before ordering.
Request a part
Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
How often should bearings be serviced?
Once a year or at the mileage the axle maker recommends, and more often for a boat trailer.
Can you replace a complete axle?
Yes, we order the axle with the right rating and measurements, and install it.
Do Dexter parts fit every trailer?
Dexter equips a great many trailers; we find the part from the axle and its measurements.
Do you service trailers bought elsewhere?
Yes, our shop services and repairs every make of trailer, whatever its brand and wherever it was bought, from small utility trailers to heavy deckovers.
Do you sell the parts alone, without installation?
Yes, at the counter, with advice on fitting them; many owners do their own bearings and brakes, and we make sure they leave with every part the job needs, including seals and cotter pins.
How do I order a part from Martin Remorques?
Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.
Can Martin Remorques install the part?
Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.
Your next project
Let’s talk
A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.








