Need a hitch to tow your first trailer, or a new one for your new vehicle? In Saint-Ambroise-de-Kildare, near Joliette, we install the trailer hitch and wiring on your car, SUV or truck.
You just bought a trailer and your vehicle has no hitch
02
In use
You changed vehicles
03
In use
You want to add a bike rack or cargo basket
04
By eye
Your trailer lights don’t work with your vehicle
05
By eye
Your hitch is rusty or too small for your new trailer
06
In use
Your new trailer has electric brakes
HOW IT WORKS
Simple and done right
You call us
The vehicle’s make, model and year, and what you want to tow.
We find the right hitch
We check what fits your vehicle and plan the parts.
We set the appointment
With the parts ready, you bring the vehicle to the shop.
We install and test
Hitch, wiring and plug: you leave ready to tow.
01
Which hitch class should you choose?
Receiver hitches run from Class I to Class V. The small classes suit cars and light loads, like a small trailer or a bike rack. The middle classes are for SUVs and light trucks. The big classes are made for trucks and heavy loads. But the hitch class doesn’t tell the whole story: what counts is the weakest link.
Your vehicle has its own towing capacity, listed in its manual, and it can be lower than the hitch’s. Before choosing, look at what your vehicle can tow and what your loaded trailer weighs. Our guide to choosing a trailer helps you do the math.
02
Wiring, the other half of the job
A trailer has to repeat your vehicle’s lights: running, brake and turn signals. That’s the job of the wiring and plug. A small utility trailer often uses a 4-wire plug. A trailer with electric brakes needs a 7-way plug and a brake controller. We install wiring for all types of vehicles.
03
What our customers say
« Un immense MERCI a Jérémie ainsi qu’à son équipe pour leur professionnalisme et leur gentillesse. Le travail est soigné et l’accueil est chaleureux. Plus que ravis pour l’installation d’un hitch . Merci encore André et Monique » Monique L., Google review, as written in French.
« EXCELLENT service!!! Prix honnête, j’y suis allé pour l’installation de mon hitch Je recommande fortement cette compagnie! » Marie-Anne R., Google review, as written in French.
Trailer hitch installation is written right on our storefront, at 270, route 343.04
Hooking up properly once the hitch is on
Once the hitch is on, there are a few habits to pick up. Tongue weight should be around 10 to 15% of the loaded trailer’s weight. Too little weight up front and the trailer sways. Too much and the back of the vehicle squats. Spread the load to stay in that range.
The trailer should ride roughly level. If it points up or down, a ball mount with the right drop or rise fixes that. Make sure the coupler is closed and locked, cross the chains under the tongue and leave just enough slack for turns. Don’t back through a tight turn without watching the clearance between trailer and vehicle: that’s how bumpers get damaged. If your trailer is heavy, see air suspension too. Keep the receiver clean as well: a little grease on the bar and a pin that isn’t seized make hooking up easier, and they stop road salt from locking the ball mount in place over the winter. If you don’t use the hitch for months, take the ball mount out and store it inside.