Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · LOCKS

Enclosed trailer door locks

The doors of an enclosed trailer often protect thousands of dollars of tools or machines. A puck lock, a latch lock or a cam lock strengthens their original closure.

Enclosed trailer door locks

Three ways to lock a door

A puck lock, round with no visible shackle, fits on a hasp: bolt cutters have almost nothing to grab. A latch lock covers the rear door handle and stops it from turning. A cam lock replaces the side door handle.

Trimax makes puck locks and trailer door locks, in keyed-alike sets with its coupler locks. Our shop installs hasps and locks on your trailer.

PDC enclosed trailer door lockAMPLockPDC enclosed trailer door lock

Choosing for the door

Look at the door type: double rear doors with cam bars, ramp door, side door. Measure the existing hasp, or ask us to install a stronger one, welded or bolted to the frame.

A job site trailer benefits from having all its locks on one key: the doors, the coupler and the toolbox. Keep a spare key somewhere other than the truck.

Latchguard trailer and container latch lockAMPLockLatchguard trailer and container latch lock

In practice

An electrician who leaves an enclosed trailer on site overnight puts a puck lock on the rear door and a coupler lock, keyed alike. A snowmobile trailer parked at the trail lodge gets a lock on its ramp door.

THPXL solid steel puck padlockTrimaxTHPXL solid steel puck padlock

Good to know

Hinges are often the weak point of a trailer door: carriage bolts or rivets in place of exposed screws stop anyone from taking the door off from the outside. Our shop can replace them.

A motion sensor or a battery alarm inside the trailer, and a hidden GPS tracker, complete the locks for a trailer full of tools. Keep the most expensive tools out of sight, even inside an enclosed trailer, so nobody is tempted to try the doors.

If a door closes badly, have its hinges and cam bars adjusted before you change the lock: a door that binds wears out the lock and lets water in around the seal.

TBL338 bullet latch lockTrimaxTBL338 bullet latch lock

Rear, ramp and side doors

Double rear doors close with cam bars; a hasp welded between the two doors takes the puck lock. A ramp door closes with spring latches on both sides, each of which takes a lock. The side door has its own keyed lock, often the same on many trailers: replacing it with a unique lock closes a door that other keys open.

TMC10 coupler lever or door latch lockTrimaxTMC10 coupler lever or door latch lock

Worth remembering

For a catering, retail or mobile workshop trailer opened and closed twenty times a day, a cam lock on the side door and a puck lock on the rear doors at night strike a good balance between security and time. The crew works without fumbling with padlocks during the day, and the trailer is properly closed when everyone goes home.

UMAX100 universal coupler lockTrimaxUMAX100 universal coupler lock

What we can order

  • Puck locks
  • Reinforced hasps
  • Rear door latch locks
  • Cam locks and side door handles
  • Keyed-alike sets with the coupler lock

Care

Lubricate the locks and cam bars before winter, and check that the hasp bolts are tight.

A frozen puck lock thaws with a lock de-icer.

UMAX50 coupler lock and U-lockTrimaxUMAX50 coupler lock and U-lock

Ordering at Martin Remorques

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers of this part type

AMPLock

AMPLock

Trailer anti-theft locks: coupler, gooseneck, kingpin and door locks.

PDC enclosed trailer door lockLatchguard trailer and container latch lockTLS-2516P adjustable coupler lock, 2 5/16 in.
Trimax

Trimax

Maker of hitch, coupler and trailer locks, and padlocks.

THPXL solid steel puck padlockTBL338 bullet latch lockTMC10 coupler lever or door latch lock

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Why a puck lock?

Its shackle is hidden: bolt cutters have almost nothing to grab.

Can you install a hasp?

Yes, our shop installs reinforced hasps and locks on enclosed trailers.

Can the doors and the coupler share one key?

Yes, with a keyed-alike set.

Is a new enclosed trailer well locked?

Its original locks close the doors, but many trailers often share the same key; a puck lock and a unique side door lock add real protection for the tools inside.

Does a puck lock fit every hasp?

It needs a hasp made for it, with a matching cutout; if your trailer does not have one, our shop can weld or bolt one on so the puck lock sits flush and tight.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm