Choose your part
Three ways to lock a door
A puck lock, round with no visible shackle, fits on a hasp: bolt cutters have almost nothing to grab. A latch lock covers the rear door handle and stops it from turning. A cam lock replaces the side door handle.
Trimax makes puck locks and trailer door locks, in keyed-alike sets with its coupler locks. Our shop installs hasps and locks on your trailer.
AMPLockPDC enclosed trailer door lockChoosing for the door
Look at the door type: double rear doors with cam bars, ramp door, side door. Measure the existing hasp, or ask us to install a stronger one, welded or bolted to the frame.
A job site trailer benefits from having all its locks on one key: the doors, the coupler and the toolbox. Keep a spare key somewhere other than the truck.
AMPLockLatchguard trailer and container latch lockIn practice
An electrician who leaves an enclosed trailer on site overnight puts a puck lock on the rear door and a coupler lock, keyed alike. A snowmobile trailer parked at the trail lodge gets a lock on its ramp door.
TrimaxTHPXL solid steel puck padlockGood to know
Hinges are often the weak point of a trailer door: carriage bolts or rivets in place of exposed screws stop anyone from taking the door off from the outside. Our shop can replace them.
A motion sensor or a battery alarm inside the trailer, and a hidden GPS tracker, complete the locks for a trailer full of tools. Keep the most expensive tools out of sight, even inside an enclosed trailer, so nobody is tempted to try the doors.
If a door closes badly, have its hinges and cam bars adjusted before you change the lock: a door that binds wears out the lock and lets water in around the seal.
TrimaxTBL338 bullet latch lockRear, ramp and side doors
Double rear doors close with cam bars; a hasp welded between the two doors takes the puck lock. A ramp door closes with spring latches on both sides, each of which takes a lock. The side door has its own keyed lock, often the same on many trailers: replacing it with a unique lock closes a door that other keys open.
TrimaxTMC10 coupler lever or door latch lockWorth remembering
For a catering, retail or mobile workshop trailer opened and closed twenty times a day, a cam lock on the side door and a puck lock on the rear doors at night strike a good balance between security and time. The crew works without fumbling with padlocks during the day, and the trailer is properly closed when everyone goes home.
TrimaxUMAX100 universal coupler lockWhat we can order
- Puck locks
- Reinforced hasps
- Rear door latch locks
- Cam locks and side door handles
- Keyed-alike sets with the coupler lock
Care
Lubricate the locks and cam bars before winter, and check that the hasp bolts are tight.
A frozen puck lock thaws with a lock de-icer.
TrimaxUMAX50 coupler lock and U-lockOrdering at Martin Remorques
Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.
Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.
You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Request a part
Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
Why a puck lock?
Its shackle is hidden: bolt cutters have almost nothing to grab.
Can you install a hasp?
Yes, our shop installs reinforced hasps and locks on enclosed trailers.
Can the doors and the coupler share one key?
Yes, with a keyed-alike set.
Is a new enclosed trailer well locked?
Its original locks close the doors, but many trailers often share the same key; a puck lock and a unique side door lock add real protection for the tools inside.
Does a puck lock fit every hasp?
It needs a hasp made for it, with a matching cutout; if your trailer does not have one, our shop can weld or bolt one on so the puck lock sits flush and tight.
How do I order a part from Martin Remorques?
Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.
Can Martin Remorques install the part?
Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.
Your next project
Let’s talk
A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.











