Ratchet straps
The ratchet strap is the most used tie-down tool: a polyester web, a ratchet that tightens it and two hooks. It holds an ATV, a snowmobile, a side-by-side, furniture or a stack of materials, and stores in a toolbox.

Choose your part
Width and rating
The width of the web gives an idea of its strength: 1 in. for small loads, 1 1/2 in. for ATVs and snowmobiles, 2 in. for side-by-sides and heavier loads, 3 and 4 in. for flatbeds. The true measure is the working load limit on the sewn tag, often about 3,333 lb for a good 2 in. strap.
A strap with no tag has no known rating and should not be used to secure a load on the road. Erickson and Faucher make tagged straps for securing recreational vehicles, materials and flatbed loads.
Erickson78632 ratchet strap, 2 in. x 22 ft, 10,000 lb, wear sleeveThe end fittings
A double J hook catches a ring or a rail and does not slip off easily; an S hook, simpler, suits closed anchor points; a flat hook sits on the edge of a deckover; an E-track fitting goes into the rails of an enclosed trailer. An endless loop strap wraps around the load.
For an ATV or a side-by-side, a soft loop, which goes around the frame or rack, protects the paint and avoids putting a metal hook on a fragile part.
Erickson01440 retractable ratchet strap, 1.5 in. x 16 ft, 5,000 lbTightening properly
Wind enough web onto the ratchet for two or three wraps, no more: too many wraps jam the mechanism. Tighten until the machine’s suspension compresses a little, close the ratchet and tie off the extra web so it does not flap in the wind.
Stop after the first few kilometres to check the tension: the load settles and the straps loosen a little.
Erickson01432 The Winder ratchet strap, 1 in. x 15 ft, 1,200 lbIn practice
A snowmobiler secures the sled on the trailer with two straps at the front, on the ski arms, and two at the back. A side-by-side owner takes four 2 in. straps with soft loops and double J hooks, one at each corner, pulling diagonally.
Faucher7840640 ratchet strap, 2 in. x 20 ft, flat hooksCommon widths
- 1 poSmall loads, luggage, tarps
- 1 1/2 poATVs, snowmobiles, motorcycles
- 2 poSide-by-sides, materials, heavier loads; often about 3,333 lb working load limit
- 3 et 4 poFlatbeds and heavy loads
What we can order
- Ratchet straps from 1 to 4 in.
- Double J, S and flat hooks
- E-track fittings
- Soft loops for ATVs and side-by-sides
- Endless loop straps
- Replacement ratchets and webbing
Care
Replace a strap that is cut, frayed, burned, sun-faded or has an unreadable tag, and a bent or rusted ratchet. Store straps rolled up, dry and out of the sun.
Protect the web with a corner protector or a sleeve wherever it touches a sharp edge.
Faucher7846681 ratchet strap, 4 in. x 30 ft, wire hooks, 6,670 lbOrdering at Martin Remorques
Tell us what you tie down, its weight and your anchor points: we find the right straps and hooks.
Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.
Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.
You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Request a part
Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
Which width for an ATV?
Most often 1 1/2 in., or 2 in. for a side-by-side.
Can a strap be knotted?
No, a knot greatly reduces its rating; use a strap of the right length.
When should a strap be replaced?
As soon as it is cut, frayed, burned, faded or missing a readable tag.
How do I release a jammed ratchet?
Pull the release tab and open the ratchet fully flat; a ratchet that jams often has too many wraps of web on its spindle, so leave fewer wraps next time and it will open smoothly.
Do the straps work in an enclosed trailer?
Yes, with E-track fittings or floor rings; we can add either if your trailer has no anchor points.
Are straps sold individually?
Yes, one at a time or in sets of four, which covers the four corners of an ATV, a snowmobile or a side-by-side.
How do I order a part from Martin Remorques?
Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.
Can Martin Remorques install the part?
Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.
Your next project
Let’s talk
A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.











