Buyers ProductsBuyers Products
Work truck equipment: toolboxes, warning lights, hitches and snowplow parts.
A binder tightens the tie-down chain between the trailer and the machine. Well chosen and well used, it keeps the load still for the whole trip; misused, its handle can injure. Two models: lever and ratchet.

A lever binder closes in a single motion: quick, simple and with no delicate moving parts. But the handle stores a lot of force and can snap back violently if it slips out of your hands when opening or closing. It has to be tied off once closed.
A ratchet binder tightens with short strokes of its handle and loosens the same way, with no sudden snap. It takes a little more time, but it tightens harder, more precisely and more safely, which makes it the choice of most haulers today.
Faucher7800648 lever chain binder, 5/16 to 3/8 in. chainA binder carries a working load limit and a range of chain sizes, for example 5/16 to 3/8 in. or 3/8 to 1/2 in. It has to be rated at least as high as the chain: a binder that is too weak becomes the weak link of the tie-down.
Buyers Products and Faucher make lever and ratchet binders for the common grade 70 chains, with grab hooks at both ends.
Faucher7801176 ratchet chain binder, 5/16 to 3/8 in. chainPlace the binder where you can work it standing, well braced, never leaning over the handle. Never slip a pipe over the handle to force it: if the chain will not tighten, shorten the chain by a link. After the first few kilometres, check the tension.
Faucher7801190 grade 70 ratchet binder, 3/8 to 1/2 in. chainA contractor who loads a mini excavator every day replaces the lever binders with ratchet binders: less effort, less risk for the crew. A farmer keeps lever binders for light loads that are tied and untied often.
Faucher7801401 swivel-handle ratchet binder, 5/16 to 3/8 in. chainA chain is tightened from the trailer anchor, through the machine and back to the binder, placed on the side where it can be worked. On a lever binder, a safety strap or wire around the closed handle stops it from opening on the road. On a ratchet binder, the handle folds down against the chain.
The binder and its hooks have to match the chain size: a hook that is too big lets the link slip, one that is too small will not take it.
Erickson78632 ratchet strap, 2 in. x 22 ft, 10,000 lb, wear sleeveGrease the screw and pawl of a ratchet binder every season, and check the hooks and joints of a lever binder. A bent, cracked or seized binder gets replaced.
Store binders dry with the chains.
Erickson01440 retractable ratchet strap, 1.5 in. x 16 ft, 5,000 lbTell us your chain size and grade: we find the right binders.
Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.
Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.
You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Buyers ProductsWork truck equipment: toolboxes, warning lights, hitches and snowplow parts.
The availability of a part and of each model is confirmed with the team before ordering.
Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
Yes: it does not snap back, and it tightens and loosens smoothly.
No, it is dangerous; shorten the chain by a link instead.
Yes, its rating has to be at least the chain’s.
They are sold separately or together, with the same rating, so a matched set of four chains and four binders is ready to tie down a machine as soon as you pick it up.
One per chain, so at least four for the four corners, plus one more if the bucket or attachment gets its own chain.
Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.
Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.
A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.