LED trailer tail lights
A trailer’s tail lights show that it is there, that it is braking and that it is turning. Stop, tail and turn lights and the plate light all have to work before every trip. LED lights last longer and stand up better to vibration and water.

Choose your part
Round, oval or rectangular
Trailer lights come in several shapes and sizes: small 2 in. or 4 in. rounds, 6 in. ovals sealed in a rubber grommet, and rectangular combination lights that bring stop, turn, tail and sometimes the plate light into one housing. The shape is chosen to replace the old light without drilling.
Grote and Uni-Bond make LED lights for trailers of every size, and Hopkins makes lights and complete lighting kits for small trailers.
Uni-BondLTL4141K-S LED submersible trailer light kit, under 80 in.Why switch to LED
An LED light has no filament to break over bumps, draws little current and lights up instantly, which gives the driver behind more time to react. Sealed, it stands up to water and salt better than an ordinary bulb in a housing that takes on moisture.
For a boat trailer, submersible lights, sealed and made to go under water, save changing bulbs after every launch.
Uni-BondLTL5451 LED submersible tail light, under 80 in.Wiring them in
Most lights connect with a pin plug or with wires crimped onto the trailer harness. A good ground is essential: most light failures come from a rusted or loose ground wire, not from the light itself. Our shop redoes the connections with sealed connectors.
Uni-BondAXL4000-10R 4.75 in. round LED stop/turn/tail light, rubber housingIn practice
A utility trailer owner replaces old bulb lights, always burned out or full of water, with LED combination lights and redoes the ground: the lights finally work every time they are plugged in. An angler fits submersible lights on the boat trailer.
Grote53142 Grote SuperNova 4 in. round LED stop/tail/turn lightGood to know
A trailer that hides the vehicle’s lights has to have its own, complete and visible: stop, turn on both sides, running lights and plate lighting. A broken tail light is replaced right away: the driver behind cannot tell that the trailer is braking or turning, which is exactly when a rear-end collision happens.
Grote54792-3 Grote SuperNova 6 in. oval LED stop/tail/turn lightWhat we can order
- LED combination lights
- 2 and 4 in. round lights
- 6 in. oval lights and rubber grommets
- Submersible lights for boat trailers
- Plate lights and brackets
- Complete lighting kits
Care
Check every light before each trip, with a helper or by watching their reflection. Clean the lenses and keep the connections coated with dielectric grease.
A light that flickers or comes on with another one often has a bad ground.
Grote47172 Grote SuperNova 3 in. thin-line LED clearance marker, redOrdering at Martin Remorques
Bring a photo or the measurements of your lights, or bring the trailer in: we find the right lights and install them.
Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.
Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.
You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Request a part
Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
Can I switch to LED without new wiring?
Often yes, if the wiring and the ground are in good shape.
Why don’t my lights work?
Most often a rusted ground or a corroded plug; our shop tracks down the fault.
What are submersible lights?
Sealed lights made to go under water, for boat trailers.
Do LED lights cost more?
A little more to buy, but they last far longer and rarely need replacing, so they usually cost less over the life of the trailer than bulbs that burn out every season.
Do you fit lights on a new trailer?
Yes, on a trailer you are building or re-equipping, with the full harness, the junction box and a proper ground, so every light works from the first day.
Are lights sold in pairs?
Often, yes, left and right, so both sides of the trailer match in brightness and colour.
How do I order a part from Martin Remorques?
Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.
Can Martin Remorques install the part?
Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.
Your next project
Let’s talk
A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.






