Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · LIGHTING AND WIRING

Trailer connectors and wiring: 4, 5, 6 and 7-way

The connector links the vehicle to the trailer: lights, brakes, battery charging and reverse all run through its pins. The right connector, wiring in good shape and a good ground make the trailer work the first time, every time it is plugged in.

Trailer connectors and wiring: 4, 5, 6 and 7-way

The common connectors

The 4-way flat connector carries the running, stop and turn lights: it is enough for small trailers without brakes. The 5-way adds a wire, often to lock out surge brakes when reversing. The 6-way round adds electric brakes and a power feed. The 7-way blade, the one on pickups and RVs, carries the lights, electric brakes, battery charging and reverse.

Adapters connect a 7-way vehicle to a 4-way trailer, and the reverse for lights only. Hopkins, Curt, Tekonsha and Grote make connectors, adapters, harnesses and wiring parts.

82-2149 Grote adapter, 7-way RV to 6-poleGrote82-2149 Grote adapter, 7-way RV to 6-pole

The vehicle wiring

On most vehicles, a T-connector harness made for the model plugs in between the vehicle’s lights and its wiring, without cutting a wire, and provides a trailer socket at the back. Recent vehicles often need a module that protects their computer and powers the trailer lights through a direct wire from the battery.

82-1055NB Grote combination 7-way and 4-flat socketGrote82-1055NB Grote combination 7-way and 4-flat socket

The trailer wiring

On the trailer, the harness runs from the connector to the lights, often inside the frame. The white ground wire has to be fastened solidly to the frame, on clean metal: it is the cause of most failures. A junction box at the front groups the connections and makes repairs easier. Wires of sufficient gauge feed the brakes without losing power.

A circuit tester, plugged into the vehicle socket, shows at a glance whether each function is there, which separates a vehicle fault from a trailer fault.

PT2504 25 ft 4-wire flat harness with connectorsUni-BondPT2504 25 ft 4-wire flat harness with connectors

In practice

A pickup owner buying an equipment trailer with electric brakes has a 7-way socket and a brake controller installed. A utility trailer whose lights only half worked gets a new harness, a junction box and a redone ground.

PT1204 12 in. 4-wire flat lead with connectorsUni-BondPT1204 12 in. 4-wire flat lead with connectors

Connectors

  • 4 brins platRunning, stop and turn lights
  • 5 brins platLights and surge brake reverse lockout
  • 6 brins rondLights, electric brakes and power feed
  • 7 brins à lamesLights, electric brakes, battery charging and reverse

What we can order

  • 4, 5, 6 and 7-way connectors
  • Connector adapters
  • Vehicle-specific T-connector harnesses
  • Protection modules for recent vehicles
  • Junction boxes, wire and terminals
  • Circuit testers

Care

Keep the sockets closed with their covers and coat the pins with dielectric grease. Secure the trailer cord so it does not drag on the ground while driving.

Replace a wire with a split jacket: water gets in and eats the copper.

LTL4141K-S LED submersible trailer light kit, under 80 in.Uni-BondLTL4141K-S LED submersible trailer light kit, under 80 in.

Ordering at Martin Remorques

Tell us your vehicle and trailer, its brakes and accessories: we find the connector and the harness, and install them.

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers of this part type

Hopkins

Hopkins

Maker of towing wiring, connectors and brake controllers.

Curt

Curt

Maker of hitches, ball mounts, wiring harnesses and brake controllers.

Grote

Grote

Maker of truck and trailer lighting and wiring.

82-2149 Grote adapter, 7-way RV to 6-pole82-1055NB Grote combination 7-way and 4-flat socket53142 Grote SuperNova 4 in. round LED stop/tail/turn light

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
4-way or 7-way?

4-way is enough for a small trailer’s lights; 7-way is needed for electric brakes and charging.

Does the vehicle wiring need cutting?

Rarely: a model-specific T-connector harness plugs in without cutting.

Why do my lights act up?

Most often a rusted ground or corroded pins.

Can you repair trailer wiring?

Yes, or replace it completely if it is too damaged; a new harness with a junction box often costs little more than chasing faults in an old one, and it ends the problem for good.

Must the vehicle connector match the trailer’s?

Yes, or go through an adapter that keeps the functions you need; an adapter from 7-way to 4-way keeps the lights but drops the brakes, which is fine only for a trailer without them.

Do you troubleshoot electrical faults?

Yes, with a tester, from the vehicle socket to the last light, so we fix the actual cause rather than swapping parts until something works.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm