Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · HITCHES AND BRAKING

Hitch pins, receiver adapters and extensions

The small hitch parts often make the difference: a pin and its clip, an adapter that reduces a 2 1/2 in. receiver to 2 in., an extension to clear a spare tire, or a receiver tube to weld onto a trailer.

Hitch pins, receiver adapters and extensions

Pins and clips

The pin goes through the receiver and the shank, and the clip keeps it from coming out. It comes in 1/2 in. for 1 1/4 in. receivers and 5/8 in. for 2 and 2 1/2 in. receivers, in standard or longer lengths for adapters.

A clip lost on the road lets the pin work its way out: carry a spare in the glovebox, or switch to a locking pin.

21500 5/8 in. hitch pin for 2 in. receiverCurt21500 5/8 in. hitch pin for 2 in. receiver

Adapters and extensions

An adapter reduces a large receiver for a smaller shank: from 2 1/2 to 2 in., or from 2 to 1 1/4 in. for a bike rack. An extension moves the shank away from the vehicle to clear a spare tire, a step or the tailgate.

An extension lowers the hitch’s allowed capacity, sometimes by up to half: it suits bike racks and cargo carriers, rarely heavy trailers. The reduced rating is marked on the extension.

45792 dual receiver extender, 2 in.Curt45792 dual receiver extender, 2 in.

Weld-on tubes and anti-rattle

Weld-on receiver tubes, made by Buyers Products, add a receiver to a trailer, a snowplow, an ATV or farm equipment. Our shop welds them on solidly and paints them.

An anti-rattle tightener takes up the play between shank and receiver: less noise, less wear, and a bike rack that no longer sways.

45795 14 in. receiver extenderCurt45795 14 in. receiver extender

In practice

A heavy truck owner with a 2 1/2 in. receiver uses an adapter for a 2 in. bike rack. A farmer has a receiver tube welded to the back of a hay wagon to hitch a small cart behind it.

45048 receiver adapter, 2 1/2 in. to 2 in., 34 in.Curt45048 receiver adapter, 2 1/2 in. to 2 in., 34 in.

Choosing well

A well chosen adapter slides into the large receiver without play and takes the shank without forcing; its pin has to go through both, hence a longer pin than usual. The shorter the adapter, the less it reduces capacity and the less noise it makes.

For a receiver added to a trailer or a piece of equipment, the weld and the location matter as much as the tube: it has to be welded to a solid part of the frame, straight and at the right height. Our shop chooses the tube, welds it on and protects it against rust.

13902 Class 3 multi-fit hitch, 2 in. receiverCurt13902 Class 3 multi-fit hitch, 2 in. receiver

Pins by receiver

  • Récepteur de 1 1/4 po1/2 in. pin
  • Récepteur de 2 po5/8 in. pin
  • Récepteur de 2 1/2 po5/8 in. pin, or adapter down to 2 in.

What we can order

  • 1/2 and 5/8 in. pins and clips
  • 2 1/2 to 2 in. and 2 to 1 1/4 in. adapters
  • Receiver extensions
  • Weld-on receiver tubes (Buyers Products)
  • Anti-rattle tighteners
  • Receiver covers

Care

Lightly grease the pin and shank, and remove them a few times a season so rust does not seize them to the receiver.

Replace a bent or worn pin: it no longer holds the shank properly.

15511 Class 5 multi-fit hitch, 2 in. receiverCurt15511 Class 5 multi-fit hitch, 2 in. receiver

Ordering at Martin Remorques

Tell us your receiver size and what you want to put in it: we find the right pin, adapter or extension.

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers of this part type

Curt

Curt

Maker of hitches, ball mounts, wiring harnesses and brake controllers.

21500 5/8 in. hitch pin for 2 in. receiver45792 dual receiver extender, 2 in.45795 14 in. receiver extender

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Does an extension reduce capacity?

Yes, sometimes by up to half; the reduced rating is marked on the extension.

Can a receiver be welded onto a trailer?

Yes, our shop welds receiver tubes onto trailers and equipment.

Which pin for a 2 in. receiver?

A 5/8 in. pin.

Does an adapter rattle?

A little, like any part in a receiver; an anti-rattle tightener fixes most cases, and a short adapter rattles less than a long one.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm