Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
PARTS · CUSTOM CHAIN

Chain cut to length and repair links

For a gate, a farm drag, a generator to anchor, a stump to pull or a trailer to secure at the back of the yard, we cut chain by the foot and fit the right hooks and links.

Chain cut to length and repair links

Chain by the foot

Chain comes on a spool and is cut to the link. It comes in several diameters and grades: grade 30 for light and decorative uses, grade 43 for the farm, light towing and logging, and grade 70 for tie-down and heavy uses.

The finish matters too: galvanized chain resists rust outdoors all year, zinc-plated or yellow chain suits everyday uses, and stainless steel chain serves near the water.

516CH30 grade 30 chain, 5/16 in., cut by the footFaucher516CH30 grade 30 chain, 5/16 in., cut by the foot

Coupling and repair links

A pinned or bolted coupling link joins two pieces of chain, or a chain to a hook, with the same rating as the chain if it is the same grade. A quick link, which screws closed by hand, is handy for frequent hooking and unhooking, but it must have a marked rating at least equal to the chain.

An unmarked hardware store link, a snap hook or a bolt through two links carry nothing reliable: they reduce the whole chain to their low rating.

82930 quick link, 3/8 in., 2,200 lbCurt82930 quick link, 3/8 in., 2,200 lb

Common uses

On the farm, a 14 or 20 ft grade 43 chain with hooks pulls a stump, a drag or a stuck tractor. At the cottage, a galvanized chain closes the driveway with a padlock. On the job site, a chain anchors the generator or the trailer to a fixed point overnight.

82942 weld-on joining link, 7/16 in., raw steelCurt82942 weld-on joining link, 7/16 in., raw steel

In practice

A woodlot owner orders a 20 ft, 3/8 in. grade 43 chain with a grab hook at one end and a slip hook at the other, to skid logs with the ATV. A neighbour has 30 ft of galvanized chain cut for the gate.

39365032 grade 70 twin coupling link, 1/2 in.Faucher39365032 grade 70 twin coupling link, 1/2 in.

Good to know

To pull a stump or a vehicle, a chain should never be used as a recovery strap: it does not stretch and passes on the full jolt. Pull gently, without a run-up, and keep everyone out of line with the chain. A blanket laid over the chain drops it to the ground if something gives way.

664220 grade 80 connecting link, 7/32 in.Faucher664220 grade 80 connecting link, 7/32 in.

Grades

  • Grade 30Light uses and gates
  • Grade 43Farm, logging and light towing; 3/8 in.: about 5,400 lb
  • Grade 70Tie-down and heavy uses; 3/8 in.: about 6,600 lb

What we can order

  • Chain by the foot in grade 30, 43 and 70
  • Galvanized, zinc-plated and stainless chain
  • Pinned and bolted coupling links
  • Rated quick links
  • Hooks fitted when cut
  • 14 and 20 ft chains with hooks

Care

Store chain dry and coiled, and check its links before a heavy use. Chain with surface rust is still good; deeply pitted or stretched chain gets replaced.

Never pull with a knotted chain: the knot greatly reduces its rating.

80307 grade 70 transport chain, 5/16 in. x 20 ft, 2 grab hooksCurt80307 grade 70 transport chain, 5/16 in. x 20 ft, 2 grab hooks

Ordering at Martin Remorques

Tell us the use, the length and the hooks you want: we cut and assemble the chain while you wait, depending on stock.

Martin Remorques orders its parts from its suppliers, depending on the manufacturer, and receives them at its Saint-Ambroise-de-Kildare counter. Bring the part number, a photo of the part or its label, and the make, model and year of your trailer or vehicle: we check fit, price and lead time before we order.

Our shop in Saint-Ambroise-de-Kildare installs what we sell: hitches, brakes, wiring, axles, bearings, winches and accessories. You leave with a trailer ready to roll, and we keep a note of the part for next time.

You can also come to the counter, at 270, route 343, Monday to Friday from 8 am to 5 pm, with the part to replace: it is often the fastest way to find the right one.

Martin Remorques in Saint-Ambroise-de-Kildare
THE MANUFACTURERS

Manufacturers of this part type

Curt

Curt

Maker of hitches, ball mounts, wiring harnesses and brake controllers.

82930 quick link, 3/8 in., 2,200 lb82942 weld-on joining link, 7/16 in., raw steel80307 grade 70 transport chain, 5/16 in. x 20 ft, 2 grab hooks

The availability of a part and of each model is confirmed with the team before ordering.

PART REQUEST

Request a part

Describe the part or give its number: we find the right one, confirm price and lead time, and can install it.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

The part is for
Installation

We confirm fit, price and lead time before ordering.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Can I buy chain by the foot?

Yes, cut to the link, with or without hooks.

Is a quick link as strong?

If it has a marked rating at least equal to the chain, yes; otherwise, no.

Which chain for a gate?

Galvanized chain, which resists rust outdoors all year.

Do you cut chain while I wait?

Often, yes, depending on the diameter and grade in stock; for a special grade or a long length, we order it and call you when it is ready to pick up.

Can an existing chain be lengthened?

Yes, with a coupling link of the same grade and chain of the same diameter, so the joined chain keeps one consistent rating along its whole length.

How do I order a part from Martin Remorques?

Fill in the part request on this page or call us at 450 759-0472 with the part number or a photo. We confirm fit, price and lead time before ordering.

Can Martin Remorques install the part?

Yes. Our shop installs the parts we sell, by appointment, and checks the rest of the trailer when needed: lights, brakes, bearings and hitch.

Let’s talk it through

Your next project
Let’s talk

A trailer in mind, a part to find or maintenance to discuss? Get in touch with our team.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm