N&N Big Wheel utility trailers
The Big Wheel is N&N’s solid side utility trailer: fully welded 16" sides, a hot-dip galvanized unibody and a folding rear ramp. The D3 is built for everyday tasks, and the tougher D4 for heavy loads.

Not in the yard right now
Here’s what we have that’s close
The 2 models to order
Not in the yard? Martin Remorques orders this trailer from N&N in the configuration chosen with you.
Big Wheel D3
Single or double 3,500 lb axle, 14" tires, 2,000 to 2,400 lb payload
Big Wheel D4
Reinforced tubular frame, 5,000 lb split ramp, 5,400 to about 9,350 lb payload
A utility trailer that does more
The Big Wheel’s whole structure is hot-dip galvanized to an average of 70 microns, compared with 8 or 9 microns for galvanized sheet: it resists rust very well. Embossed side panels add rigidity, and open stake pockets at all four corners take extensions or canoe and boat racks.
The folding rear ramp folds down to cut wind resistance on the road, which helps fuel use. The floor is hemlock planking, and D-rings hold the load.
D3 or D4
The Big Wheel D3 comes with a single 3,500 lb axle or two 3,500 lb axles, with 14" tires, a 2" coupler and a 7,000 lb jack: it carries 2,000 to 2,400 lb. Electric brakes are optional.
The Big Wheel D4 has a frame of 2 × 4" tubing in 1/8" steel, a triple tube tongue with a box, stabilizer legs and a split ramp gate rated 5,000 lb. It carries 5,400 to about 9,350 lb depending on the configuration, and 4" galvanized drop axles are optional.
In practice
At the cottage, the Big Wheel D3 carries the snowmobile in winter and the ATV in summer; its 16" sides also keep firewood and luggage inside the box on gravel roads. With racks in the stake pockets, it carries the canoe or kayak too, so one trailer covers every season.
A self-employed worker or a landscaper takes the Big Wheel D4 instead: its tubular frame and 5,000 lb split ramp gate handle a compact loader or a small tractor, and its solid sides hold in soil, stone and tools, so nothing falls off between two job sites.
Good to know
The open stake pockets at all four corners take wooden side extensions that add volume for leaves, mulch or loose firewood. Keep the load spread out and slightly heavier ahead of the axles so the trailer tows straight, and strap tall loads to the D-rings before you leave the yard.
The models
- Big Wheel D3Single or double 3,500 lb axle, 14" tires, 2,000 to 2,400 lb payload
- Big Wheel D4Reinforced tubular frame, 5,000 lb split ramp, 5,400 to about 9,350 lb payload
Standard equipment
- Hot-dip galvanized unibody
- Fully welded 16" solid sides
- Folding rear ramp
- Hemlock plank floor
- Open stake pockets at all four corners
- D-rings in the floor
- 7,000 lb jack and A-frame tongue
Available options
In service
Hot-dip galvanizing protects the Big Wheel, but a rinse in spring removes salt from the corners. Check the ramp hinges, bolts and tire pressure before long trips.
Once a year, have the bearings, brakes if fitted, and lights checked. Our shop does this service and our parts department orders N&N parts.
Ordering at Martin Remorques
Tell us what you haul and your vehicle: we choose with you the D3 or the D4, the axle and the options.
Martin Remorques orders this trailer from N&N in the configuration chosen with you. We first check that it suits your vehicle, your load and your use, we prepare the order with the manufacturer and we give you the expected delivery date. You can come and see the trailers in stock at our dealership, 270, route 343, in Saint-Ambroise-de-Kildare, Monday to Friday, 8 am to 5 pm.
For financing, we work with National Bank of Canada for individuals and Mitsubishi HC Capital Canada for businesses: we prepare the application with you; the institution approves it and sets the rate. Financing
After the purchase, our shop services and repairs your trailer: bearings, brakes, suspension, lights, wiring and hydraulics. Our parts and accessories department orders the parts you need, and we install the equipment that makes the trailer more practical, such as a winch, tie-down rails or a storage box. Service
More views


Your N&N quote
N&N Big Wheel utility trailers: tell us what you haul and with what vehicle. We suggest the model and its options, with its price.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.
How high are the sides?
16", fully welded.
Can the Big Wheel D4 carry a small excavator?
Its ramps are rated 5,000 lb and it carries up to about 9,350 lb depending on the configuration; let’s check your machine’s weight together.
Can a canoe rack go on it?
Yes, the open stake pockets at all four corners take canoe or boat racks.
Does the Big Wheel’s ramp fold?
Yes, the rear ramp folds, which cuts wind resistance on the road.
How do I get the price of a N&N trailer?
Fill in the quote form on this page or call us at 450 759-0472. Tell us the configuration you want: we call you back with the model, the options and the price, Monday to Friday, 8 am to 5 pm.
Does Martin Remorques service N&N trailers?
Yes. Our shop in Saint-Ambroise-de-Kildare services and repairs trailers: bearings, brakes, suspension, lights, wiring and hydraulics. Our parts department orders the replacement parts you need.
Your next trailer
Shall we talk?
Tell us what you haul: we find the right model and its options, and we give you its price.




