Saint-Ambroise-de-Kildare, LanaudièreMon–Fri · 8 am–5 pm450 759-0472
Martin Remorques et V.R. Find my trailer
N&N · 4 TRAILER TYPES

N&N equipment trailers

N&N equipment trailers haul the lawn tractor as well as the mini excavator, in galvanized steel, with 82" between the fenders. Martin Remorques sells the Sequoia, Iron, Lowland and Gravitor series, and often keeps them in stock.

N&N Gravitor H8 equipment trailer with tilting deck
N&N · Equipment
IN STOCK

7 N&N trailers in stock

SPECIAL ORDER

The 4 types in this category

Four ways to load

The light, compact Sequoia loads by a 48" double rear ramp gate: it is the trailer for a lawn tractor or an ATV. The Iron loads by interchangeable ramps and goes up to 21,000 lb GVWR with the three-axle C8. The Lowland C6 tilts by a hydraulic system at the front and loads with no ramp, almost at ground level. The Gravitor H8 combines a fixed front deck and a deck that tilts by gravity.

All have a hemlock floor that does not rot, galvanized axles, D-rings and stabilizer legs.

Choosing by the machine

The machine’s weight, with its attachments, decides the GVWR: 7,000 lb for a compact tractor or small loader, 9,820 to 15,000 lb for a mini excavator, up to 21,000 lb for heavier farm and construction equipment. The machine’s ground clearance decides the loading method: ramps, hydraulic tilt or gravity tilt.

In practice

A lawn care company that moves a lawn tractor and a few mowers from one customer to the next often picks a Sequoia: low and light, it backs easily into a driveway and loads in a few minutes over its rear ramp. At the end of the day it parks without taking up much room in the yard, and it is light enough that a half-ton pickup handles it all season.

An excavation contractor who moves a mini excavator every week looks at the Iron C8 or the Gravitor H8 instead. The Iron carries a lot for its own weight and loads over heavy-duty ramps; the Gravitor tilts, so nobody has to lift and set heavy ramps, which makes loading faster and easier on the crew’s backs at the end of a long day.

The very low Lowland C6 is the trailer for tight job sites and for machines that are hard to drive up ramps: a compactor roller, a compact track loader or a lift. Its winch plate takes a winch to pull on a machine that does not run, which helps when equipment breaks down on site and has to go back to the shop.

Before you choose

Bring us the weight of the machine with its attachments, such as the bucket, the breaker or the auger, and its width: they decide the GVWR, the number of axles and the way you load. We then compare the four series with you, side by side, against the truck you already own and the way you plan to use the trailer.

What the four series share

The Sequoia, Iron, Lowland and Gravitor share the same basics: hot-dip galvanized steel, a hemlock floor, galvanized axles and 82" between the fenders. Our parts department orders N&N parts for every one of these series, and our shop services them, so you deal with one place for the whole life of the trailer.

Buying at Martin Remorques

Martin Remorques orders this trailer from N&N in the configuration chosen with you. We first check that it suits your vehicle, your load and your use, we prepare the order with the manufacturer and we give you the expected delivery date. You can come and see the trailers in stock at our dealership, 270, route 343, in Saint-Ambroise-de-Kildare, Monday to Friday, 8 am to 5 pm.

For financing, we work with National Bank of Canada for individuals and Mitsubishi HC Capital Canada for businesses: we prepare the application with you; the institution approves it and sets the rate. Financing

After the purchase, our shop services and repairs your trailer: bearings, brakes, suspension, lights, wiring and hydraulics. Our parts and accessories department orders the parts you need, and we install the equipment that makes the trailer more practical, such as a winch, tie-down rails or a storage box. Service

N&N IN PHOTOS

More views

N&N equipment trailers, view 2
N&N equipment trailers, view 3
QUOTE

Your N&N quote

N&N equipment trailers: tell us what you haul and with what vehicle. We suggest the model and its options, with its price.

Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.

We call you back with a proposal and its price.

FREQUENTLY ASKED QUESTIONS

Your questions,
our answers

Ask my question
Which N&N trailer for a mini excavator?

The Lowland C6, which loads with no ramp, or the Iron C8 and Gravitor H8 for heavier machines.

How wide between the fenders?

82" on the Sequoia, Iron and Gravitor, 2" more than the market’s 80" standard.

Is the floor wood?

Yes, solid hemlock, a wood that does not rot.

Which N&N trailer for a lawn tractor?

The Sequoia C4, with two 3,500 lb axles, carries 4,900 to 5,500 lb: enough for a lawn tractor and mowers.

Tilt or ramps?

A tilt trailer such as the Lowland or the Gravitor loads with no ramps and faster; a ramp trailer such as the Sequoia or the Iron is lighter and carries more for its own weight.

How do I get the price of a N&N trailer?

Fill in the quote form on this page or call us at 450 759-0472. Tell us the configuration you want: we call you back with the model, the options and the price, Monday to Friday, 8 am to 5 pm.

Does Martin Remorques service N&N trailers?

Yes. Our shop in Saint-Ambroise-de-Kildare services and repairs trailers: bearings, brakes, suspension, lights, wiring and hydraulics. Our parts department orders the replacement parts you need.

Let’s talk it through

Your next trailer
Shall we talk?

Tell us what you haul: we find the right model and its options, and we give you its price.

Talk to the team450 759-0472Mon–Fri · 8 am–5 pm